[Frost] I added the link in DC-calibration part.

[Sungkyun Park]

Hi all,

I add the link, which has the sector information after the 14th iteration, in the our meeting page :

   http://clasweb.jlab.org/rungroups/g9/wiki/index.php/DC_Calibration

The following web is the link added in our web.

   http://hadron.physics.fsu.edu/~skpark/DC_Cal_g9b/DC_Cal_nov1811.html

I will describe some points.
1. In the iteration 13, the calibration constant of run 62850 is copied into constants of the run range between 62321 and 62844. 
2. The runs with more than 62845 is not touched after changed from 32bit to 64bit.
3. In the iteration 14, I have selected some run ranges whose means have higher than 50 or lower than -50 for calibration. 
4. In each sector, the mean of super-layer 5 and 6 are moved down. However, others are similar before and after. 
5. After the 14th iteration, some runs with more than 62845 are also worst. (That was the first touch after updating to 63bit)

I will try to install dc3 of 32bit and 64bit in JLab and test them.

 Sung
 Florida State University