[Halla_running] Reminder : experiment meeting Monday 02/09/15 4PM Hall C counting house

[Alexandre Camsonne]

Summary experiment meeting

Present : Bob, Thia, Steve, Doug, Dave Meekins, Kijun, Marco, Mongi,
Longwou, Alexandre


Dave Meekins :

2 standard cell loop cooled down, no leak

Silviu cell loop still leaks : leak might be in loop not in cell

Need to place the tune cylinder target

Would like to know when we would cool down : lock up is on Feb 27th, so
about a week later at the soonest


On Feb 9, 2015 12:56 PM, "Alexandre Camsonne" <camsonne at jlab.org> wrote:
>
> Let's meet today so we can see where we stand. We will meet in Hall C
counting house. Second floor is almost done we should check when we can
invade the place.
>
> In previous mail :
>
> I had those topics
>
> -beamline
> --ARC measurement (Doug ?)
Harp new controller installed and working ( Thanks Javier ! ) need new
software from accelerator to analyze
Mapper working
Need checked HV of ARC HARPs

> --Compton
> ---cavity  ( Dave ?)
New mirror, same type. Coupling still low 25 %
Might try higher reflectivity later
> ---photon ( Bob ?)
Led pulser back and working
See amplitude in CMU DAQ

Auxiliary signals plugged in : helicity, cavity power , laser polarization,
bcm

Should be able to get an asymmetry
> ---electron detector ( Alex )
IOC back online after Sue set it back. Can control low voltage, high
voltage and threshold

Ported software to new computer. Can take data and decode

Detector in beamline for checks, many hot strips but since Compton edge is
pretty far at high energy, current detector should be OK even with missing
strip so would tend to stick with old detector. Testing electronics without
detector, hot strips still there so most likely electronics /noise problem.

> --raster ( Luke / Bob ? )
Raster non uniformity, observed in sampled current. High frequency ripple
going in driver might causes spikes. So the spikes in current are real,
this might induce a bit of more of boiling ( to be quantified but most
likely small ), not an issue for DVCS, at first glance should be OK for GMp
> --BCM / Unser ( Thir  ?)
Legacy working fine
New receiver died in middle of run : suspect is locking frequency of the
box is fixed. New pathlength adjustement scheme involves tuning accelerator
frequency which could get out the bandwidth range of the BCM receiver.
Fiber optic to carry the frequency will eventually be installed to fix that
( unlikely to be done for this run ). So need to pay attention to matching
of BCM and accelerator frequency to have a BCM backup to legacy.

>
>
> -HRS ( Longwu, Yang, Barak or Kalyan ? )
>
Left HRS checked out, scaler double pulsing fixed

Right HRS : detector checked out, some issues with VDC ( ? plots in HALOG !
)

> -DVCS
> --electronics ( Marco / Alex )

Test stand operation. Ben to check out the bad spare ARS board.

Rest of electronics should be fine

> --calorimeter  ( Carlos / Mongi ? )

Nothing on DVCS calorimeter for now
> --F1 ( Marco / Steve / Alex ?)

Steve has several spare. Will check the bad boards and setup F1 in test
crate to test spares.

GMp related from Cynthia :

SOS will be powered this week

>
>
> Luke confirmed he will be around. I can update on Compton Edet, DVCS
electronics.
> Feel free to come by and update.
>
> If you thing of any items we need to have worked out you can add to
>
>
https://docs.google.com/spreadsheets/d/1XJCvkLtSNXv9YiQ03gXwI_OkozhJdkWlD1IlxgIPtww/edit#gid=0
>
> you can also update the status of a system there so we can keep track.
>
> I will start Blue Jeans from my phone
>
> To join the Meeting:
> https://bluejeans.com/378767746
>
> To join via Browser:
> https://bluejeans.com/378767746/browser
>
> To join with Lync:
> https://bluejeans.com/378767746/lync
>
> To join via Cisco Jabber Video:
> https://bluejeans.com/378767746/jabber
>
>
> To join via Room System:
> Video Conferencing System: bjn.vc -or- 199.48.152.152
> Meeting ID: 378767746
>
> To join via Phone:
> 1) Dial:
> +1 408 740 7256
> +1 888 240 2560(US Toll Free)
> +1 408 317 9253(Alternate Number)
> (see all numbers - http://bluejeans.com/numbers)
> 2) Enter Conference ID: 378767746
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://mailman.jlab.org/pipermail/halla_running/attachments/20150209/7932d6bd/attachment.html