[Halla_running] [New Logentry] Hall A update

[sanghwa at jlab.org]

Logentry Text:
--
We continued taking production data yesterday when the beam was available. 

During the day shift, we had a short escorted access to increase the cooling jet flow rate to reduce the FSD trips caused by the faulty readback (https://logbooks.jlab.org/entry/4182168). Todd also realigned the GRINCH camera and brought out the spare carbon foils so that it can be prepared for tomorrow's target work.
There was an issue with a 1C05 quad (MQK1C05) during the swing shift, and it was brought back after replacing the trim supply (https://logbooks.jlab.org/entry/4182290).

Out plan for today is to continue taking production data.

Tomorrow is the maintenance day, and we have a list of tasks planned. MCC will take the beam away in the morning and RadCon will start the survey at 7am. The hall will be in restricted access for the most of the access, but we may switch to CANS mode at the end for the laser work. If you have work to be done in the hall, best to do in the morning. If you have work to do and haven't talked to RC yet, please let the RC know.

We will meet at 3:30pm, at the 2nd floor CH conference room.
ZOOM https://jlab-org.zoomgov.com/j/1616220064 pw: 314159


---

This is a plain text email for clients that cannot display HTML.  The full logentry can be found online at https://logbooks.jlab.org/entry/4182665
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/halla_running/attachments/20230919/3344ba2c/attachment.html>