[Hallb-engineering] [Hallb] Solenoid magnet

[Dave Kashy]

Hi All
By noon today the Solenoid was shimmed and bolted to its beamline cart.
By 17:00 the lower four transport lugs had been removed. Small changes in force readback vs the as welded values were observed but at this time don't seem to be of concern. We will know more when the upper 4 are removed in the morning. This will also allow the survey team to get the first set of data after transport.
If you look closely you will notice many dozen cables instrumentation attached
Dave
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image1.JPG
Type: image/jpeg
Size: 2115621 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/hallb-engineering/attachments/20170628/54b5dfd7/attachment-0001.jpe>
-------------- next part --------------

Sent from my iPhone

> On Jun 28, 2017, at 11:10 AM, burkert <burkert at jlab.org> wrote:
> 
> Dear all,
> 
> The solenoid magnet has safely arrived at Jefferson Lab yesterday afternoon. This morning it has been rigged into place in the beam line.  The attached photo shows the magnet during transfer to the beam line still hanging from the crane.
> 
> Volker
> 
> 
> 
> 
> <DSC_0196.JPG>
> _______________________________________________
> Hallb mailing list
> Hallb at jlab.org
> https://mailman.jlab.org/mailman/listinfo/hallb