[Hallb-engineering] DC Mix 2 CO2 Flow

[Brian Eng]

The regulator for the CO2 used for Mix 2 needs to be adjusted.

The MFC valve was at 100% but not flowing anything, which is almost always due to the upstream pressure not being high enough. In the attached plot the scale for the MFC is -2 to 2 SLM.

I put the mixing system in manual mode and set the flows for mix 2 to 0 so the tank won't be filled with just Argon.

Once the regulator is adjusted or the pressure in the tank gets below ~95 it can be put back into automatic mode.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Screen Shot 2018-07-28 at 2.24.17 PM.png
Type: image/png
Size: 12842 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/hallb-engineering/attachments/20180728/54b83366/attachment.png>