[Hallb-engineering] Data logging of Hall B vacuum signals

[David Kashy]

Hi Nathan,
I'm not sure if you are still involved in this but I'm requesting that ALL Hall B Torus vacuum epics signals are data logged. These are allon the Torus Vacuum  Controls - PLC GUI

My suggestion is that if a signal changes more than 10% in value the new value is logged. This should be plenty granular to see important changes and log events and yet not take too much data, because these are quite stablel signals. They typically jitter on the 2nd or 3rd significant digit.

Thanks
Dave
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/hallb-engineering/attachments/20230824/c9e1e097/attachment.html>