[Hallb-engineering] [New Logentry] Follow-up Re: Torus Strain Gage Alarm Tripped Again

[kashy at jlab.org]

Logentry Text:
--
After resolving the Z support alarm I called the counting house. They told me that there were still alarms and gave me a signal name. 
I found this to be the strain gage on one of the Upstream Hex Beam (sector 4) and the force was tickling the high limit of 5000 lbs.

I looked at the data logger and found that this too had been higher and had been alarming on and off Since Oct 2024 See plot
I increased the alarm setpoint value to 5300 lbs

This too should be further investigated...

Dave

---

This is a plain text email for clients that cannot display HTML.  The full logentry can be found online at https://logbooks.jlab.org/entry/4353690
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/hallb-engineering/attachments/20250411/ed274b90/attachment.html>