[Hallc_running] [New Logentry] RC Update

[jones at jlab.org]

Logentry Text:
--
Current status

1) Switched to SHMS angle= 6.39deg at 1pm on Saturday.
2) Running production on LD2 Q2=3.85, W=3.07, x=0.31, low epsilon, HMS angle=35.12 deg, HMS momentum = -1.332 GeV/c, SHMS angle= 6.39deg, SHMS momentum=-6.538 GeV/c;
3) 6uA was the best current for running at this angle.
4) Swing and Owl shift went smoothly. At end of owl had 700 pions.

PLans

Day :
  1) LD2 Q2=3.85, W=3.07, x=0.31, low epsilon, HMS angle=35.12 deg, HMS momentum = -1.332 GeV/c, SHMS angle= 6.39deg, SHMS momentum=-6.538 GeV/c;
  2) Need a FADCmode 10 run
  3) Need daily one hour trigger 3/4 runs.
Swing
   1) LD2 Q2=3.85, W=3.07, x=0.31, low epsilon, HMS angle=35.12 deg, HMS momentum = -1.332 GeV/c, SHMS angle= 6.39deg, SHMS momentum=-6.538 GeV/c;
Owl
   1) LD2 Q2=3.85, W=3.07, x=0.31, low epsilon, HMS angle=35.12 deg, HMS momentum = -1.332 GeV/c, SHMS angle= 6.39deg, SHMS momentum=-6.538 GeV/c;

Notice for Crew

1) The Raster Coil pair Ax and Ay are off. Raster needs to be at 4x4.
2) With LHe alarms it is good to check the cameras for plumes. If no plume and it is below the LO alarm and above LOLO then monitor with a plot and halog the problem.
3) With LNitrogen alarms are not that critical. Just need to start monitoring the problem with plot and halog.


Analyzsis of EDTm study ( see https://logbooks.jlab.org/entry/3956686)   noticed a bug in the prescale GUi (see https://logbooks.jlab.org/entry/3956696). 


---

This is a plain text email for clients that cannot display HTML.  The full logentry can be found online at https://logbooks.jlab.org/entry/3956767
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/hallc_running/attachments/20211205/6cf7645d/attachment.html>