[Halld-cal] Fwd: Hall D Cable Assignment

[Zisis Papandreou]

Hi Elton:

I looked over the BCAL cable assignments in the two files sent.  The 
naming scheme is just fine.  I noticed that in the "Cable Labels" file 
the 3-3-4 scheme is used, since we have only 12 ADC and 8 TDC cables per 
side per module.  In "Cable Labelling" both options are listed but again 
the numbers correspond to the 3-3-4 arrangement.

i understand this to be so because the full amount for the extra rings 
has not been approved formally.  In any case, once we get approval, the 
max label number can be simply extended from BCAL-1-U-A-11 upwards to 
BCAL-1-U-A-15, etc.

Cheers, Zisis...

> Elton Smith <mailto:elton at jlab.org>
> March 27, 2012 5:38 AM
>
>
> -------- Original Message --------
> Subject: 	Hall D Cable Assignment
> Date: 	Sat, 24 Mar 2012 16:16:33 -0400
> From: 	Fernando J Barbosa <barbosa at jlab.org>
> To: 	Elton Smith <elton at jlab.org>, Beni Zihlmann <zihlmann at jlab.org>, 
> Lubomir Pentchev <pentchev at jlab.org>, "Mark M. Ito" <marki at jlab.org>, 
> Alexander Somov <somov at jlab.org>, Hovanes Egiyan <hovanes at jlab.org>, 
> John Leckey <leckey at jlab.org>, Matthew Shepherd 
> <mashephe at indiana.edu>, Elliott Wolin <wolin at jlab.org>, Mark Stevens 
> <stevensm at jlab.org>
> CC: 	Eugene Chudakov <gen at jlab.org>, "Fernando J. Barbosa" 
> <barbosa at jlab.org>
>
>
>
> Hi all,
>
> We need to finalize the cable assignment in preparation for cable
> bundling, testing and installation in Hall D. Specifically, I need to
> know from you, those responsible for sub-systems/detectors, which cables
> get connected to which detector elements and to which
> racks/crates/modules. Please also consider which cables need to be
> routed to favor trigger formation, if applicable. This information
> should be generally in the following form:
>
> Detector-Detector Element-Cable Label-Rack-Crate-Slot.
>
> In other cases, such as controls, there will be instances of cabling
> from a particular unit in a rack to another rack. In either case,
> please provide me with an xlsx file for each of your sub-systems.
>
> I have attached two pdfs: Cable Labeling contains the labeling norms we
> agreed to some time ago; Cable Labels contains the official labels that
> were sent to the cable vendor at the time of award. GlueX-doc-1452
> contains all the information on racks in the hall.
>
> I need to have this information by April 27 because cable preparation
> starts in May.
>
> Thanks for your attention and best regards,
> Fernando
>
> _______________________________________________
> Halld-cal mailing list
> Halld-cal at jlab.org
> https://mailman.jlab.org/mailman/listinfo/halld-cal
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://mailman.jlab.org/pipermail/halld-cal/attachments/20120401/028b31f8/attachment.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: compose-unknown-contact.jpg
Type: image/jpeg
Size: 770 bytes
Desc: not available
Url : https://mailman.jlab.org/pipermail/halld-cal/attachments/20120401/028b31f8/attachment.jpg