[Halld-cal] Cal Working Group Meeting tomorrow

[Elton Smith]

Hi Will,

We heard some sounds now and then, but thought it was Athens trying to 
connect. Did you try to type a message? Sometimes that is a good way to 
work through some of the audio problems. (I might have missed that if my 
message box was not visible).

I suspect the best way to debug this would be to schedule a time outside 
the meeting (or before the start) and work through the process to try to 
identify the problem sources.

Cheers, Elton.

Elton Smith
Jefferson Lab MS 12H5
12000 Jefferson Ave STE 16
Newport News, VA 23606
(757) 269-7625
(757) 269-6331 fax

On 9/24/13 11:12 AM, William Brooks wrote:
> Hi,
>
>   I tried to connect via H.323, but was not able to get an answering connection. Then I connected by Seevogh, and I could see and hear the meeting, but you couldn't hear me. Don't know how to fix this.
>
> Thanks,
>
>   - Will
>
> On Sep 23, 2013, at 4:54 PM, Elton Smith <elton at jlab.org> wrote:
>
>> Dear colleagues,
>>
>> We will have our bi-weekly Cal Working group meeting tomorrow at 11:00.
>> The tentative agenda is below. Update as necessary.
>>
>> Cheers, elton.
>>
>>
>> = Tentative Agenda =
>>
>> # Announcements
>> # [[GlueX-Collaboration-Oct-2013|October Collaboration Meeting]]
>> # Action Items
>> # Monitoring
>> # FCAL
>> # BCAL
>> #* Moved BCAL into solenoid!
>> #* Photos
>> [http://gluex.phys.uregina.ca/content/photo/downstream-view-bcal-after-installation
>> Downstream View],
>> [http://gluex.phys.uregina.ca/content/photo/upstream-view-bcal-after-installation
>> Upstream View],
>> [http://gluex.phys.uregina.ca/content/photo/closeup-upstream-view-bcal-after-installation-four-support-strips-are-visible
>> Closeup Upstream View]
>> #* Removed readout assemblies from both sides of six modules (33-37 and
>> 41) for inspection
>> #* All electronics dry. No visible damage
>> #* Assemblies on the rail pads very tight. Need to remove inside plate
>> on some in order to take them off. This should be standard procedure.
>> #* Downstream no visible anomalies.
>> #* Upstream, boundary between module 41 and 40 showed a thicker dark
>> band at interface (about 1-2 fibers instead of 0.5-1), but did not
>> appear to be due to insertion of the module. Seems consistent with
>> Regina archival photo
>> [http://kronos.phys.uregina.ca/~zisis/travellers/Mod41/photos/Mod41R.jpg
>> End 2 Image].
>> #* Conclude: no damage found due to insertion of the BCAL into the solenoid.
>> # Reconstruction and Simulation
>> # TDR update
>> # Calibration of Calorimeters
>> # Any other business
>>
>> -- 
>> Elton Smith
>> Jefferson Lab MS 12H5
>> 12000 Jefferson Ave STE 16
>> Newport News, VA 23606
>> (757) 269-7625
>> (757) 269-6331 fax
>>
>> _______________________________________________
>> Halld-cal mailing list
>> Halld-cal at jlab.org
>> https://mailman.jlab.org/mailman/listinfo/halld-cal