[Halld-cal] Cal Working Group Meeting tomorrow

[William Brooks]

Hi, 

 I typed a message, which popped up a window on your screen, which you closed….

I have the feeling this is not a recurring problem. It seemed like networks, somewhere, were busy. If it happens again we could try to debug it.

Thanks, 

 - Will

On Sep 24, 2013, at 12:10 PM, Elton Smith <elton at jlab.org> wrote:

> Hi Will,
> 
> We heard some sounds now and then, but thought it was Athens trying to connect. Did you try to type a message? Sometimes that is a good way to work through some of the audio problems. (I might have missed that if my message box was not visible).
> 
> I suspect the best way to debug this would be to schedule a time outside the meeting (or before the start) and work through the process to try to identify the problem sources.
> 
> Cheers, Elton.
> 
> Elton Smith
> Jefferson Lab MS 12H5
> 12000 Jefferson Ave STE 16
> Newport News, VA 23606
> (757) 269-7625
> (757) 269-6331 fax
> 
> On 9/24/13 11:12 AM, William Brooks wrote:
>> Hi,
>> 
>>  I tried to connect via H.323, but was not able to get an answering connection. Then I connected by Seevogh, and I could see and hear the meeting, but you couldn't hear me. Don't know how to fix this.
>> 
>> Thanks,
>> 
>>  - Will
>> 
>> On Sep 23, 2013, at 4:54 PM, Elton Smith <elton at jlab.org> wrote:
>> 
>>> Dear colleagues,
>>> 
>>> We will have our bi-weekly Cal Working group meeting tomorrow at 11:00.
>>> The tentative agenda is below. Update as necessary.
>>> 
>>> Cheers, elton.
>>> 
>>> 
>>> = Tentative Agenda =
>>> 
>>> # Announcements
>>> # [[GlueX-Collaboration-Oct-2013|October Collaboration Meeting]]
>>> # Action Items
>>> # Monitoring
>>> # FCAL
>>> # BCAL
>>> #* Moved BCAL into solenoid!
>>> #* Photos
>>> [http://gluex.phys.uregina.ca/content/photo/downstream-view-bcal-after-installation
>>> Downstream View],
>>> [http://gluex.phys.uregina.ca/content/photo/upstream-view-bcal-after-installation
>>> Upstream View],
>>> [http://gluex.phys.uregina.ca/content/photo/closeup-upstream-view-bcal-after-installation-four-support-strips-are-visible
>>> Closeup Upstream View]
>>> #* Removed readout assemblies from both sides of six modules (33-37 and
>>> 41) for inspection
>>> #* All electronics dry. No visible damage
>>> #* Assemblies on the rail pads very tight. Need to remove inside plate
>>> on some in order to take them off. This should be standard procedure.
>>> #* Downstream no visible anomalies.
>>> #* Upstream, boundary between module 41 and 40 showed a thicker dark
>>> band at interface (about 1-2 fibers instead of 0.5-1), but did not
>>> appear to be due to insertion of the module. Seems consistent with
>>> Regina archival photo
>>> [http://kronos.phys.uregina.ca/~zisis/travellers/Mod41/photos/Mod41R.jpg
>>> End 2 Image].
>>> #* Conclude: no damage found due to insertion of the BCAL into the solenoid.
>>> # Reconstruction and Simulation
>>> # TDR update
>>> # Calibration of Calorimeters
>>> # Any other business
>>> 
>>> -- 
>>> Elton Smith
>>> Jefferson Lab MS 12H5
>>> 12000 Jefferson Ave STE 16
>>> Newport News, VA 23606
>>> (757) 269-7625
>>> (757) 269-6331 fax
>>> 
>>> _______________________________________________
>>> Halld-cal mailing list
>>> Halld-cal at jlab.org
>>> https://mailman.jlab.org/mailman/listinfo/halld-cal