[Halld-controls] Hall d Network Specifications

[Elliott Wolin]

Hi Fernando,

I assume a patch panel in the ACC rack, but I'll let them (Brad Cumbia, 
I suspect) decide.  They'll have to decide soon...


On 10/15/2013 03:54 PM, Fernando J Barbosa wrote:
> Hi Elliott,
>
> I will make the changes as noted on the link you provided. What 
> specifically is the "area near the Accelerator racks"? Patch panel? 
> Mounted on the wall?
>
> Thanks and best regards,
> Fernando
>
>
>
> On 10/15/2013 3:47 PM, Elliott Wolin wrote:
>> Hi,
>>
>> Almost final version based on comments received.  Main change: I 
>> added a multi-mode fiber bundle to extend the 24 multi-mode fibers 
>> from the Rack Room down to an area near the Accelerator racks:
>>
>> https://halldweb1.jlab.org/wiki/index.php/Hall_Network_Specifications
>>
>> Please get comments back ASAP since we are nearly ready to proceed 
>> with a PR using these specs.
>>
>> Thanks,
>>
>>     Elliott and Mark
>>
>

-- 

				Sincerely,
					Elliott
  

================================================================================


  Those raised in a morally relative or neutral environment will hold
		    no truths to be self-evident.
				

Elliott Wolin
Staff Physicist, Jefferson Lab
12000 Jefferson Ave
Suite 8 MS 12A1
Newport News, VA 23606
757-269-7365

================================================================================