[Halld-cpp] Fwd: CPP target details

[Justin Stevens]

Another update from Bobby with a possible rotated position of the target assembly, showing which parts of the target holder might be seen by the beam in this orientation.
-Justin

Begin forwarded message:

From: Bobby Bunton <bunton at jlab.org<mailto:bunton at jlab.org>>
Subject: Re: CPP target details
Date: June 30, 2022 at 3:00:04 PM EDT
To: Justin Stevens <jrsteven at jlab.org<mailto:jrsteven at jlab.org>>

Hi Justin,

Heres what I was able to do, I drew a small circle around the center of the beam line for visibility, and I positioned the target approximately where the ball detent would first come into contact with the catch. I think this is where you would start feeling resistance in the handle but just before it breaks over and clicks. If it was under rotated its likely it was somewhere in the vicinity of this angle.

Thanks,
Bobby

[cid:EFEB6B87-11C4-4C3D-89E3-66A1858F8CD8][cid:8E2D5771-8469-470A-8FFE-D28BB856A46E]

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/halld-cpp/attachments/20220630/b4e47b3a/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: screen1.jpeg
Type: image/jpeg
Size: 20041 bytes
Desc: screen1.jpeg
URL: <https://mailman.jlab.org/pipermail/halld-cpp/attachments/20220630/b4e47b3a/attachment-0002.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: screen2.jpeg
Type: image/jpeg
Size: 13674 bytes
Desc: screen2.jpeg
URL: <https://mailman.jlab.org/pipermail/halld-cpp/attachments/20220630/b4e47b3a/attachment-0003.jpeg>