<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
</head>
<body>
<font face="Helvetica, Arial, sans-serif">followup:<br>
after closer inspection it turns out that the second connector on
the ADC input is broken and<br>
does not properly engage with the cable connector. I connected the
second signal cable to<br>
the 4th channel of the ADC.<br>
<br>
attached you also see a picture of the second scintillator below
the wire chamber that <br>
only needs to be connected to HV and signal cables. And a
coincidence established<br>
with the upper scintillator.<br>
<br>
cheers,<br>
Beni<br>
</font><br>
<div class="moz-cite-prefix">On 8/27/21 12:20 PM, Beni Zihlmann
wrote:<br>
</div>
<blockquote type="cite"
cite="mid:394cd092-51a4-1f74-b7d4-51310c7758d8@jlab.org">
<br>
Hi All,
<br>
<br>
1) found that the lemo cable that was supposed to be connected to
channel 2 was lying on the ground.
<br>
I reconnected it to channel 2. Channel 1 was and is still
connected.
<br>
<br>
2) gas bottle has been replace already. I turned the flow back on
at about 0.05l/m
<br>
<br>
3) I installed the second scintllator underneath the table. It
only needs to be connected with HV and
<br>
signal cables.
<br>
<br>
<br>
cheers,
<br>
Beni
<br>
_______________________________________________
<br>
Halld-npp mailing list
<br>
<a class="moz-txt-link-abbreviated" href="mailto:Halld-npp@jlab.org">Halld-npp@jlab.org</a>
<br>
<a class="moz-txt-link-freetext" href="https://mailman.jlab.org/mailman/listinfo/halld-npp">https://mailman.jlab.org/mailman/listinfo/halld-npp</a>
<br>
</blockquote>
<br>
</body>
</html>