[Halld-offline] [EXTERNAL] auxilliary data file needed for running with HADR=4
Colin Gleason
gleasonc at jlab.org
Fri May 15 12:48:34 EDT 2020
Whoops, sorry, I meant to say I didn't see any errors in the .err file that
stood out. Clearly there is an error that's. causing this to crash/quit.
On Fri, May 15, 2020 at 12:45 PM Colin Gleason <gleasonc at jlab.org> wrote:
> No crashes- it runs fine without any errors. Logs are located at
> /volatile/halld/home/gleasonc/pippimeta/Simulation/2017-01_4.19_G3/HADR4_b/log.
> Looking carefully at onne of the log files, I find:
>>
>> settofg: RF reference plane set to 65.0000000 cm
>> 10 events simulated
>> 20 events simulated
>> 30 events simulated
>> 40 events simulated
>> 50 events simulated
>> 60 events simulated
>> 70 events simulated
>> 80 events simulated
>> 90 events simulated
>> 100 events simulated
>> 200 events simulated
>> MICAP GTMED: GEANT Medium 11 not found ==> STOP
>> RUNNING MCSMEAR
>> 0
>> 10000
>
> It looks like this is where things go wrong, as only ~250 of the ~2k
> generated events are getting processed.
>
> This issue, or STOP, does not appear when I run interactively. Running
> interactively would show:
>
>> **** NUMBER OF EVENTS PROCESSED = 10000
>>
>> **** RANDOM NUMBER GENERATOR AFTER LAST COMPLETE EVENT 2120846575
>> 460615182
>>
>> **** TIME TO PROCESS ONE EVENT IS = 0.0529 SECONDS
>>
>>
>>
>>
>> MZEND. Usage statistics for 2 dynamic stores.
>>
>>
>> Map of store 0 /GCBANK/
>>
>> ------------------------
>>
>>
>> Division Number of times
>>
>> Kind Max-size Garb-coll.
>>
>> Mode Position used allowed Wiped user auto
>> Pushd Redcd
>>
>>
>> 1 QDIV1 0 1 5203 0 4999968 0 0 0 0
>> 0
>>
>> 2 QDIV2 1 1 2267094 1019031 4999968 10000 0 0 0
>> 0
>>
>> 19 system 1 8 2341269 68180 4999968 0 0 0 0
>> 0
>>
>> 20 Constant 1 2 4999968 2635035 4000000 0 0 141 150
>> 0
>>
>>
>> Map of store 1 /PAWC/
>>
>> ------------------------
>>
>>
>> Division Number of times
>>
>> Kind Max-size Garb-coll.
>>
>> Mode Position used allowed Wiped user auto
>> Pushd Redcd
>>
>>
>> 1 QDIV1 0 1 2 0 4999585 0 0 0 0
>> 0
>>
>> 2 QDIV2 1 1 4998185 1100 4999585 0 0 0 0
>> 0
>>
>> 19 system 1 8 4998585 111 4999585 0 0 0 0
>> 0
>>
>> 20 HIGZ 0 4 4998585 0 5000000 0 0 0 0
>> 0
>>
>> RZEND. called for RZFILE
>>
>>
>>
>> ***** Normal exit from Hall D GEANT *****
>>
>>
>>
>> RUNNING MCSMEAR
>>
>> 2
>>
>> 10000
>>
>
>
> On Fri, May 15, 2020 at 12:34 PM Thomas Britton <tbritton at jlab.org> wrote:
>
>> This is tough. From MCwrapper’s POV it does nothing special when that
>> card is in any given state. Do you mean it crashes? We’ll need some stack
>> traces.
>>
>>
>>
>> Thomas Britton
>>
>> Staff Scientist, Scientific Computing
>>
>> Jefferson Lab
>>
>>
>>
>> *From: *Colin Gleason <gleasonc at jlab.org>
>> *Sent: *Friday, May 15, 2020 12:29 PM
>> *To: *Richard Jones <richard.t.jones at uconn.edu>; Thomas Britton
>> <tbritton at jlab.org>
>> *Cc: *HallD Software Group <HallD-Offline at jlab.org>
>> *Subject: *Re: [EXTERNAL] auxilliary data file needed for running with
>> HADR=4
>>
>>
>>
>> Hi all,
>>
>>
>>
>> As a follow up to this and to keep a record for others, I can not get the
>> HADR 4 option to work when submitting jobs to the ifarm via MCWrapper
>> batch=2. I get a reasonable output when I run the job interactively, as
>> seen above. I'm using the same environment, but I'm guessing somehow the
>> correct file is not being found in batch mode. I do not see anything that
>> stands out in the log files. Thomas, any suggestions or ideas on why
>> MCWrapper does not recognize this file? My CERNLIB is located at
>> /group/halld/Software/builds/Linux_CentOS7.7-x86_64-gcc4.8.5/cernlib/2005/lib.
>>
>>
>>
>> -Colin
>>
>>
>>
>> On Wed, May 13, 2020 at 9:48 AM Colin Gleason <gleasonc at jlab.org> wrote:
>>
>> Thanks for the information, Richard. Sure enough, I do not have $CERNLIB
>> defined using the standard build. As a workaround to what Sean suggested,
>> and since I am usig C shell, I added
>>
>>
>>
>> setenv CERNLIB
>> /group/halld/Software/builds/Linux_CentOS7.7-x86_64-gcc4.8.5/cernlib/2005/lib
>>
>>
>>
>> to my setup_gluex.csh file that gets sourced when calling my environment.
>> When I tested with 1k generated events, I got 89 reconstructed. Before
>> that, as in without flukaaf.dat, I was getting 8. This compares to the ~7%
>> reconstructed events using HADR=1. I will rerun my simulation using this
>> setup.
>>
>>
>>
>> -Ccolin
>>
>>
>>
>> On Wed, May 13, 2020 at 8:53 AM Richard Jones <richard.t.jones at uconn.edu>
>> wrote:
>>
>> Colin and all,
>>
>>
>>
>> An input data file flukaaf.dat is a needed input file for running hdgeant
>> with HADR=4. This file usually resides in $CERNLIB. If CERNLIB is defined
>> on your system, then things should work. If not, then you should be sure to
>> place a copy of flukaaf.dat in the directory from which you run hdgeant. A
>> copy of this is found in the halld-sim repo in the halld software area, or
>> on cvmfs, or on github at the link provided below. Take your pick, they
>> should all be the same.
>>
>>
>>
>> - /cvmfs/
>> oasis.opensciencegrid.org/gluex/group/halld/Software/builds/Linux_CentOS7-x86_64-gcc4.8.5-cntr/cernlib/2005/lib/flukaaf.dat
>> <https://urldefense.proofpoint.com/v2/url?u=http-3A__oasis.opensciencegrid.org_gluex_group_halld_Software_builds_Linux-5FCentOS7-2Dx86-5F64-2Dgcc4.8.5-2Dcntr_cernlib_2005_lib_flukaaf.dat&d=DwMFaQ&c=CJqEzB1piLOyyvZjb8YUQw&r=_p_Zf1fP8D9GtGtaEgIPjViLbHJLGv_RV32KAKGtMbE&m=2yyxB2SUMQDNM7BpmwdbEPaT6IB-5Cn9bHhxQqrrQKg&s=63gpT7ZWLQ0R-Wa6hSh-zaVffpwWqaywCNXMmII8XB8&e=>
>> -
>> /u/group/halld/Software/builds/Linux_CentOS7-x86_64-gcc4.8.5/halld_sim/halld_sim-4.13.0/src/programs/Simulation/HDGeant/flukaaf.dat
>> -
>> https://github.com/JeffersonLab/halld_sim/blob/master/src/programs/Simulation/HDGeant/flukaaf.dat
>> <https://urldefense.proofpoint.com/v2/url?u=https-3A__github.com_JeffersonLab_halld-5Fsim_blob_master_src_programs_Simulation_HDGeant_flukaaf.dat&d=DwMFaQ&c=CJqEzB1piLOyyvZjb8YUQw&r=_p_Zf1fP8D9GtGtaEgIPjViLbHJLGv_RV32KAKGtMbE&m=2yyxB2SUMQDNM7BpmwdbEPaT6IB-5Cn9bHhxQqrrQKg&s=S73Xf0DOqe72vg3PyfcLRlVQxN1qwLRuyhuySiXPaDU&e=>
>>
>> -Richard Jones
>>
>>
>>
>>
>> --
>>
>> Colin Gleason
>>
>> Postdoctoral Fellow
>> Indiana University
>> Department of Physics
>>
>>
>>
>>
>> --
>>
>> Colin Gleason
>>
>> Postdoctoral Fellow
>> Indiana University
>> Department of Physics
>>
>>
>>
>
>
> --
> Colin Gleason
> Postdoctoral Fellow
> Indiana University
> Department of Physics
>
--
Colin Gleason
Postdoctoral Fellow
Indiana University
Department of Physics
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/halld-offline/attachments/20200515/d9d9aaa5/attachment-0002.html>
More information about the Halld-offline
mailing list