[Halld-offline] GlueX software stack built with JANA2

[Alexander Austregesilo]

Dear Colleagues,

We discovered a few problems with the version set described below. The 
JANA2 team fixed them and we just built an updated set 
$HALLD_VERSIONS/version_5.21.1_jana2.xml

This version set successfully completed the b1pi analysis test, 
producing results compatible with the current default version_5.21.0.xml.

It should be used for further testing from now on. We will start 
processing larger data sets for bench-marking purposes now.

Best regards,

Alex




On 11/7/24 19:03, Alexander Austregesilo via Halld-offline wrote:
> Dear Colleagues,
>
> We built a full new GlueX software stack based on the recently 
> released JANA v2.3.3. You can source the environment using these 
> commands:
>
> > source /group/halld/Software/build_scripts/gluex_env_boot_jlab.sh
> > gxenv $HALLD_VERSIONS/version_5.21.0_jana2.xml
>
> There may be warnings about the ownership of the git repositories 
> which you can safely ignore.
>
> Please try it out and report if you observe any problems or 
> inconsistencies.
>
> Cheers,
>
> Alex
>
>
> On 8/13/24 18:07, Alexander Austregesilo via Halld-offline wrote:
>> Dear Colleagues,
>>
>>
>> We just built the first full GlueX software stack based on JANA2 on 
>> the group disk. You can source the environment on the ifarm using 
>> these commands:
>>
>> > source /group/halld/Software/build_scripts/gluex_env_boot_jlab.sh
>> > gxenv $HALLD_VERSIONS/version_5.19.1_jana2.xml
>>
>> You can safely ignore the warnings, they only show up because jana2, 
>> halld_recon, halld_sim and hdgeant4 use unreleased branches in their 
>> respective repositories. Please try it out and report if you observe 
>> any problems or inconsistencies.
>>
>>
>> This build was produced with the build_scripts branch 'aaust_jana2'. 
>> You may build your own software stack independent of the group disk 
>> with gluex_install (https://github.com/JeffersonLab/gluex_install):
>>
>> gluex_install.sh -b aaust_jana2 -s version_5.19.1_jana2.xml -t 
>> TARGET_DIRECTORY
>>
>>
>> Big thanks to Raiqa Rasool for providing detailed instructions for 
>> building the packages.
>>
>> Best regards,
>>
>> Alex
>>
-- 
Alexander Austregesilo

Staff Scientist - Experimental Nuclear Physics
Thomas Jefferson National Accelerator Facility
Newport News, VA
aaustreg at jlab.org
(757) 269-6982