[Halld-online] DAQ node assignments for detector groups

[David Lawrence]

Hi Alex,

  I’ve gone ahead and switched the assignments so that gluon47 is now listed as “Trigger”. 
We’ll need to talk with Manuel about what best suits the FCAL needs since they had
issues running on certain machines. I just put gluon01a and gluon02 for now since I
think they had been using those.

Regards,
-David

On Aug 22, 2014, at 10:38 AM, Alexander Somov <somov at jlab.org> wrote:

> 
> Hi David,
> 
> gluon47 is the trigger PC (see the initial assignment below).
> We can move FCAL to gluon53.
> 
> I don't know whether Sergei F. wants to stay with gluon50 for
> the DAQ testing (?)
> 
> Cheers,
>       Alex
> 
> 
> 
> Alexander Somov somov at jlab.org
> Wed Jan 22 13:45:38 EST 2014
> 
> Hi,
> 
> Following up some discussions during our last meeting:
> 
> 1) In order to avoid 'interference' with running multiple event
> builders on the same host (for stand alone DAQs) I propose
> that we use the following host assignment for subdetectors
> which are being commissioned now:
> 
> FCAL:  gluon49
> BCAL:  gluon50
> CDC:   gluon51
> FDC:   gluon52
> 
> Other daq hosts in use:
>  gluon46  David Abbott
>       47  Alex
>       48  Mark
>       53  Vardan
> 
> 
> 2) The translation table that links the coda component
> name with the unique ID number will be implemented in the
> new coda release (Vardan and David A. are working on it).
> The table will be used in creating coda configurations.
> 
> Cheers,
>        Alex
> 
> 
> 
> 
> On Mon, 18 Aug 2014, David Lawrence wrote:
> 
>> 
>> Hi All,
>> 
>> I just wanted to send a reminder that we have a list of node assignments on the wiki that
>> should serve as a guide to detector groups on where to run their DAQ systems. The page
>> is linked below. These should be considered suggestions to help keep us from stepping on
>> each others toes rather than hard and fast rules. Please note that I made a few modifications,
>> including adding assignments for the tagger, PS, TOF, and Start Counter.
>> 
>> Also, as part of the large scale DAQ testing, we are going to need to pull some hardware
>> used for the high speed ethernet connections from gluon46, gluon48, and gluon51. These
>> will be reconfigured to use a 1GB ethernet connection for the DAQ (135) network so they will
>> still work just fine for current purposes.
>> 
>> https://halldweb1.jlab.org/wiki/index.php/HallD_Online_IP_Name_And_Address_Conventions#Subsystem_DAQ_Systems
>> 
>> Regards,
>> -David
>> _______________________________________________
>> Halld-online mailing list
>> Halld-online at jlab.org
>> https://mailman.jlab.org/mailman/listinfo/halld-online
>>