<div dir="ltr">Hello Sascha,<div><br></div><div>We are using the readout list that you provided to us for the UConn fiber tests, and are having problems as soon as the trigger rate gets above the level of a few kHz.  Below this rate, there are no problems, but as soon as two triggers come within a few 10&#39;s of microseconds apart, the following message is displayed on the screen where we started up the start_roc script.</div>
<div><br></div><div>faReadBlock: DMA transfer terminated by unknown BUS error (CSR = ..., xferCount = ...)</div><div><br></div><div>This message is repeated many times per second, and the actual rate of accepted events fluctuates around a few kHz.  When I try to run the analyzer on this CODA file, it crashes after a few thousand events.  </div>
<div><br></div><div>I think there might be a missing busy signal that protects the DAQ from being overrun by triggers that come at too high a rate.  Our pulser generates pulses at a fixed rate around 100kHz.  I don&#39;t want to slow down the pulses, but just prevent triggers from interrupting the readout.</div>
<div><br></div><div>Can you help me with this?</div><div><br></div><div>-Richard Jones</div></div>