[Halld-pid] Minutes, GlueX Start Counter Meeting, Mar. 10 '11

[Elton Smith]

Hi Werner,

We are designing a mechanical cooling system via flowing liquid and correcting for temperature deviations using a bias compensation scheme. However, for a single unit, the easiest solution may be to use a Peltier and attach it directly to the back of one array. There you can set the temperature precisely. I believe Fernando may have some Peltier units that you might be able to borrow.

Cheers, Elton.


On 3/15/11 8:56 AM, Mark M. Ito wrote:
> Folks,
>
> I just added a line to the minutes that I forgot to mention before...
>
> * Werner is also interested in getting advice and/or hardware from JLab
> for cooling the SiPM's in his test set-up.
>
>     -- Mark
>
> On 03/11/2011 09:51 AM, Mark M. Ito wrote:
>> Find the minutes at
>> http://www.jlab.org/Hall-D/software/wiki/index.php/GlueX_Start_Counter_Meeting%2C_March_10%2C_2011#Minutes
>> and below as text.
>>
>>      ==
>>
>> GlueX Start Counter Meeting, March 10, 2011
>> Minutes
> _______________________________________________
> Halld-pid mailing list
> Halld-pid at jlab.org
> https://mailman.jlab.org/mailman/listinfo/halld-pid