[Halld-pid] Start Counter Meeting Minutes, April 18, 2013

[Mark M. Ito]

Find the minutes below and at 
https://halldweb1.jlab.org/wiki/index.php/GlueX_Start_Counter_Meeting,_April_18,_2013#Minutes 
.
   _____

GlueX Start Counter Meeting, April 18, 2013
Minutes

    Present:
      * FIU: Eric Pooser
      * JLab: Eugene Chudakov, Chuck Hutton, Mark Ito (chair)

Construction

    Five counters have been bent and Eljen and shipped to McNeal where they
    have been received. McNeal is waiting for a PO before starting
    machining the counters. Eric is monitoring the situation.

    The test stand has undergone a substantial redesign after Eric
    discussed the design with Carlos Ortega of the FIU Physics machine
    shop. Final drawings will be done today. Hopefully machining can start
    next week.

    FIU has received their new CAEN HV cards. They have not been tested
    yet.

    Chuck checked with Jim Fochtman about the mechanical interface between
    the target and the start counter. Nothing has changed on that front.

    Some time ago Chuck and Eric discussed the idea of matching the inner
    radius of the support ring and the inner support foam. This would
    simplify mounting the counter on the construction frame. They will
    discuss this further offline.

Contract

    Mark has reviewed the technical proposal and it appears acceptable.
    Bruce Lenzer did have some QA issues with it, but it was thought that
    these could be addressed at the time of the readiness review. The terms
    and conditions for the proposal from FIU will be sent tomorrow.

Schedule

    Mark showed the [20]latest schedule from the recent rebaselining
    effort. It shows final drawings done by June 14, not so far away!

    Retrieved from
"https://halldweb1.jlab.org/wiki/index.php/GlueX_Start_Counter_Meeting,_April_18,_2013"

References

   20. https://halldweb1.jlab.org/talks/2013-2Q/start_counter.html

-- 
Mark M. Ito, Jefferson Lab, marki at jlab.org, (757)269-5295