[Halld-tagger] beamline motors in Hall D

[Franz Klein]

Looks right, Hovanes!
For the goniometer we have 3 rotational and 2 linear axes.
Does it make sense to have beam viewers in place (e.g. downstream of Gluex 
detector and/or in the electron beam dump)?

Greetings
Franz
On Wed, 13 Apr 2011, Hovanes Egiyan wrote:

> Hi,
>
> I would like to compile a full list of remotely controllable motors which we
> will use  in Hall D so that we can to plan their controls. I came up with a 
> preliminary
> list of the motors which is shown below. Please, let me know if there
> are other applications requiring remote motion control missing in
> this list,  or if some of these are not needed anymore or you think are
> redundant.
>
>
> o Goniometer  - 5 motors
>      3 motors for rotational motion?, 2 motors for linear motion
>
> o Microscope -  3 motors
>      3 positioning motors, linear motion for angular adjustment
>
> o Harps - 3 motors
>     1 tagger harp motor (accelerator control?), linear motion
>     1 tagger dump harp , linear motion
>     1 photon harp/PS converter, linear motion
>
> o Collimator 1 motor
>     1 motor for horizontal motion of the collimator, linear motion
>
> o TAC - 1 motor
>     1 motor to move Total Absorption Counter in and out of the beamline, not 
> in the
>      baseline equipment , linear motion
>
>
> Thanks,
>        Hovanes.
>

===============================================================
                   Franz J. Klein, Associate Professor
                   CUA, Department of Physics
                   Washington, DC 20064
   office: Hannan Hall 206          phone: 202-319-6190
   or: Jefferson Lab,CC F-243       phone: 757-269-6672
---------------------------------------------------------------