[Halld-tagger] [New Logentry] Correlation of TAGM / TAGH hits with the PS (data)

[somov at jlab.org]

Logentry Text:
--
The first time we read out tagger crates with the trigger. Timing offsets were adjusted.

Trigger type:       PSC
Converter:           fork frame (0.1 X0)
FADC samples:  100

2 top plots: Position of TAGH and TAGM pulses (maximum amplitudes ) in the fadc read out window.
                  - TAGM and TAGH are aligned. The TAGM peak is narrower than TAGH due to the smaller
                     particle propagation time.

2 botom plots: TAGH/TAGM occupancies
                   - groups of counters with different width can be seen in theTAGH occupancy


Trigger latency studies:

fadc offset         TI                             file
    975             0xCA        TAGM/data/tagm_calib_234.0
    975             0xA2                                               235
    925             0xA2                                               236
    925             0x96                                               237
    895             0x96                                               239
    895             0x89                                               240 (TI delay too short)
    895             0x96                                               241


---

This is a plain text email for clients that cannot display HTML.  The full logentry can be found online at https://logbooks.jlab.org/entry/3308027
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://mailman.jlab.org/pipermail/halld-tagger/attachments/20141119/a399f829/attachment-0001.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: tagger_psc.png
Type: image/png
Size: 17297 bytes
Desc: not available
Url : https://mailman.jlab.org/pipermail/halld-tagger/attachments/20141119/a399f829/attachment-0001.png