<html>
<head>
</head>
<body text="#010101" bgcolor="#ffffff">
Hi, Hovanes,<br>
<br>
I would like to add that we also have the following in the
Microscope:<br>
- 3 SciFi counter alignment motors (linear)<br>
- 1 pulser carriage motor (linear) i.e. for transporting pulsing
spot light to all fiber columns during calibration.<br>
<br>
Best,<br>
-Igor<br>
<br>
<br>
On 4/14/2011 12:32 AM, Hovanes Egiyan wrote:
<blockquote type="cite" cite="mid:4DA62473.7000003@gmail.com">
<pre wrap="">Hi,
I would like to compile a full list of remotely controllable motors
which we
will use in Hall D so that we can to plan their controls. I came up
with a preliminary
list of the motors which is shown below. Please, let me know if there
are other applications requiring remote motion control missing in
this list, or if some of these are not needed anymore or you think are
redundant.
o Goniometer - 5 motors
3 motors for rotational motion?, 2 motors for linear motion
o Microscope - 3 motors
3 positioning motors, linear motion for angular adjustment
o Harps - 3 motors
1 tagger harp motor (accelerator control?), linear motion
1 tagger dump harp , linear motion
1 photon harp/PS converter, linear motion
o Collimator 1 motor
1 motor for horizontal motion of the collimator, linear motion
o TAC - 1 motor
1 motor to move Total Absorption Counter in and out of the
beamline, not in the
baseline equipment , linear motion
Thanks,
Hovanes.
_______________________________________________
Halld-tagger mailing list
<a href="mailto:Halld-tagger@jlab.org">Halld-tagger@jlab.org</a>
<a href="https://mailman.jlab.org/mailman/listinfo/halld-tagger">https://mailman.jlab.org/mailman/listinfo/halld-tagger</a>
</pre>
</blockquote>
</body>
</html>