<div dir="ltr">I am working on a detailed Monte Carlo code for the tagger, and realized I do not know the location and thickness/material of the tagger vacuum chamber exit window. I need this for multiple scattering.  Can anyone provide it?<div><br></div><div>Recently I have exhumed my Hall B code (not run since 2001) which incorporates the SNAKE subroutines into a free-standing Monte Carlo framework, and successfully run  trajectories through the Hall D field maps to the focal plane.  I am just beginning the task of setting up the TAGH and TAGM geometries.</div><div><br></div><div>My initial goal is to calculate the acceptances and energy spectra of the high-photon-energy counters (TAGH 1-100), since these will be very sensitive to beampipe collimation and the quadrupole field.  </div><div><br></div><div>Unless someone else is working on it by some other route, I will also try to simulate the properties of the TAGM.  To do this, I will need a detailed geometry of the detector, plus some input about what you think is important, e.g. energy deposit spectrum for each fiber and correlation matrices between adjacent fibers with some given pulse height cuts.  If anyone has started working on such a code, I will happily accept contributions.  (My code is in fortran, but gfortran will also accept c++ routines.)</div><div><br></div><div>Dan</div><div><br></div></div>