[Hps-analysis] pass-2 release

[Nathan Baltzell]

Yes, done and tested a couple days ago for compact.xmls.  But I just now realized how to
make the lcdds (and committed them) after rereading the confluence page.  I checked
a couple crystal offsets relative to v2 and looks good in lcdd.


I changed the bit about pwd being detector-data to be big and red:
https://confluence.slac.stanford.edu/display/hpsg/Detector+Geometry+Overview



On Sep 8, 2015, at 7:05 PM, "Graham, Mathew Thomas" <mgraham at slac.stanford.edu> wrote:

> I think this is the v3 detector that Nathan put in a few days ago.  
> 
>> On Sep 8, 2015, at 4:02 PM, Omar Moreno <omoreno1 at ucsc.edu> wrote:
>> 
>> We need to create a new detector with the surveyed Ecal positions correct?  Maybe this was already done and I missed it.
>> 
>> On Tue, Sep 8, 2015 at 2:19 PM, Graham, Mathew Thomas <mgraham at slac.stanford.edu> wrote:
>> Oh, and please please make sure that the steering files are correct for any changes you’ve made (data an MC!!!):
>> 
>> org.hps.steering.recon.EngineeringRun2015FullRecon_Pass2.lcsim
>> org.hps.steering.recon.EngineeringRun2015FullReconMC_Pass2.lcsim
>> 
>> org.hps.steering.readut.EngineeringRun2015TrigPairs1_Pass2.lcsim
>> org.hps.steering.recon.EngineeringRun2015TrigSingles1_Pass2.lcsim
>> 
>> > On Sep 8, 2015, at 12:43 PM, Graham, Mathew Thomas <mgraham at slac.stanford.edu> wrote:
>> >
>> >
>> > Hi All,
>> >
>> > It sounds like we are very close to pushing the button on pass-2.  Before we make the release, are there any last minute fixes?  I know that Sho is working on a bug in the GBL code and Omar is finalizing the dst-maker.  I need to fix the DQM code to work with the new track states.  Anything else?  I’d like to tell Jeremy to make the release next morning…yell if you working on something.
>> >
>> > Thanks, Matt
>> >
>> > ########################################################################
>> > Use REPLY-ALL to reply to list
>> >
>> > To unsubscribe from the HPS-SOFTWARE list, click the following link:
>> > https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
>> 
>> 
>> ########################################################################
>> Use REPLY-ALL to reply to list
>> 
>> To unsubscribe from the HPS-SOFTWARE list, click the following link:
>> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
>> 
> 
> 
> Use REPLY-ALL to reply to list
> 
> To unsubscribe from the HPS-SOFTWARE list, click the following link:
> https://listserv.slac.stanford.edu/cgi-bin/wa?SUBED1=HPS-SOFTWARE&A=1
>