[Hps-analysis] combined errors

[Stepan Stepanyan]

Tim,

I disagree, your example has nothing to do with what we are discussion.
The problem that we saw is not that we measured 1 m to be 1.05 after
combining them. The problem is that in one case you device measured
1 m +/- 0.01 , another 1.1 +/- 0.05. When you combine, average may
get to 1.05 but measurement accuracy will be worse than 0.01.

Stepan

On 3/25/16 12:02 PM, Timothy Nelson wrote:
> Stepan,
>
> When combining multiple independent measurements of a quantity, the error on the combined value depends only on the errors of the individual measurements and the number of measurements, and not on any systematic shift between the two independent techniques. I understand that it is natural to think otherwise, but this is basic statistics.
>
> To make this more intuitive, consider the following thought experiment:
>
> - I have two perfectly precise methods for measuring a length, but they are systematically different by 10%
> - I use those methods to measure something that is exactly one meter long.
> - Therefore, one technique always gives exactly 1.0 meters and the other technique always gives exactly 1.1 meters
> - When I combine those two measurements, the combination is always exactly 1.05 meters, no more, no less.
>
> Obviously, from this extreme example, one can see that a systematic shift, even one that is infinitely larger than the error of either measurement alone, does not result in a wider distribution for the combined result.
>
> Tim
> _______________________________________________
> Hps-analysis mailing list
> Hps-analysis at jlab.org
> https://mailman.jlab.org/mailman/listinfo/hps-analysis