[Hps-analysis] 2021 trigger skims
Nathan Baltzell
baltzell at jlab.org
Tue Dec 7 22:03:05 EST 2021
Hello All,
After some further preparations, the 2021 trigger skims are launched.
Outputs will be going to /cache/hallb/hps/physrun2021/production/evio-skims.
I broke the run list from Norman into 5 lists, and started with the first 20% in one batch, all submitted. I'll proceed to the other 4 batches over the holidays, assessing tape usage as we go.
-Nathan
> On Nov 29, 2021, at 3:39 PM, Nathan Baltzell <baltzell at jlab.org> wrote:
>
> The 10x larger test is done at /volatile/hallb/hps/baltzell/trigtest3
>
> -Nathan
>
>
>> On Nov 29, 2021, at 2:52 PM, Nathan Baltzell <baltzell at jlab.org> wrote:
>>
>> Hello All,
>>
>> Before running over the entire 2021 data set, I ran some test jobs using Maurik’s EVIO trigger bit skimmer. Here’s the fraction of events kept in 14750 for each skim:
>>
>> fee 2.0%
>> moll 3.3%
>> muon 1.9%
>> rndm 2.9%
>>
>> In each case, it’s inclusive of all such types, e.g., moll=moll+moll_pde+moll_pair, rndm=fcup+pulser.
>>
>> Are those numbers in line with expectations? The total is 10% and not a problem if these skims are expected to be useful. The outputs are at /volatile/hallb/hps/baltzell/trigtest2 if people are interested to check things.
>>
>> A 10x larger test is running now and going to /volatile/hallb/hps/baltzell/trigtest3 and should be done in the next couple hours.
>>
>> ************
>>
>> Note, it would be prudent to do this *only* for production runs, those that would be used in physics analysis, to avoid unnecessary tape access. By that I mean removing junk runs, keeping only those with some significant number of events, and only keeping those with physics trigger settings (not special runs). For that we need a run list. I think we have close to a PB, but I remember hearing at the collaboration meeting that at least 20% is not useful for the porpoises of trigger bit skimming.
>>
>> -Nathan_______________________________________________
>> Hps-analysis mailing list
>> Hps-analysis at jlab.org
>> https://mailman.jlab.org/mailman/listinfo/hps-analysis
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 1509 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/hps-analysis/attachments/20211208/a8730edb/attachment.p7s>
More information about the Hps-analysis
mailing list