[Lerftest] LCLS-II LERF Gallery WG Supports

[Michael Martin]

thanks Neil for keeping me in the loop as far as I know from my last communication from DOE and SLAC the jury is still out and no clear path forward as of now. I was told to take tags off the units in the LERF but now was told Tuesday that site office is still deciding weather or not to replace all of the lifting eyes since they are not made in the US???? 
As soon as I know or here I will let you and Mark know. 

thanks 



Michael Martin 
Senior QA/QC Technical Specialist 
ESH&Q QA/CI Group 
757/269/5515 Office 
757/303/7942 Cell/Page 


From: "Neil Wilson" <wilsonn at jlab.org> 
To: "Kevin Jordan" <jordan at jlab.org> 
Cc: "Joseph Gubeli" <gubeli at jlab.org>, "Dave Gelhaar" <gelhaar at jlab.org>, "Anthony DiPette" <dipette at jlab.org>, "LCLS II @ LERF" <lerftest at jlab.org>, "Mark Loewus" <loewus at jlab.org>, "Michael Martin" <mjmartin at jlab.org> 
Sent: Thursday, March 15, 2018 5:58:33 AM 
Subject: Re: LCLS-II LERF Gallery WG Supports 

Hi Kevin, duly noted, we will plan to lift by another method 


From: "Kevin Jordan" <jordan at jlab.org> 
To: "Joseph Gubeli" <gubeli at jlab.org> 
Cc: "Neil Wilson" <wilsonn at jlab.org>, "Dave Gelhaar" <gelhaar at jlab.org>, "Anthony Dipette" <dipette at jlab.org>, "LCLS II @ LERF" <lerftest at jlab.org> 
Sent: Wednesday, March 14, 2018 6:38:08 PM 
Subject: Re: LCLS-II LERF Gallery WG Supports 

Hi All, 
Please do not remove the lifting eyes on the SSAs - that is the direction we have received from the owners - SLAC. 
Kevin 

Sent from my iPad 

On Mar 14, 2018, at 11:20 PM, Joseph Gubeli < gubeli at jlab.org > wrote: 






Hi Neil, 



Glad you stopped by to talk this over. Just so everybody is on the same page, we will be supporting the WG from overhead Unistrut. 



Thanks, Joe 




From: Neil Wilson [ mailto:wilsonn at jlab.org ] 
Sent: Wednesday, March 14, 2018 10:27 AM 
To: Joseph Gubeli < gubeli at jlab.org > 
Cc: Dave Gelhaar < gelhaar at jlab.org >; Kevin Jordan < jordan at jlab.org >; Anthony Dipette < dipette at jlab.org > 
Subject: Re: LCLS-II LERF Gallery WG Supports 





Hi Joe, I am hearing conflicting comments about the eyes. They may not be epoxied in. I need to take a look inside the cabinets. 


Thanks 


n 






From: "Joseph Gubeli" < gubeli at jlab.org > 
To: "Neil Wilson" < wilsonn at jlab.org >, "Dave Gelhaar" < gelhaar at jlab.org > 
Cc: "Kevin Jordan" < jordan at jlab.org > 
Sent: Wednesday, March 14, 2018 10:08:56 AM 
Subject: LCLS-II LERF Gallery WG Supports 





Hi Neil, 



Because the lifting eyes cannot be easily removed from the SSAs we will not be getting the isolator braces. Could you hang some Unistrut above the SSAs similar to what is on the last attached sheet? 



Dave, Due to the lack of room the supports have to go on that short spool. It might be a good idea if the bolt heads are on the inside of that spool to allow a little more clearance for the Unistrut. 



Thanks, Joe 



Joseph F. Gubeli 

Jefferson Lab. 

12000 Jefferson Ave. 

Newport News, VA 23606 

(757) 269-7862 (Office) 

(757) 344-4159 (Cell) 

gubeli at jlab.org 






-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/lerftest/attachments/20180315/ccc24fdd/attachment.html>