[Lowq] [Fwd: Re: recooking RTPC calibration runs]
Stepan Stepanyan
stepanya at jlab.org
Sat Apr 17 14:51:16 EDT 2010
Hi Lamiaa,
Do we really need to clean every thing up.
Can you estimate how much space do you need for pass0.
I think we should discuss what banks and what events we
want to save and in which formats for pass0.
This pass0 cooking will be to monitor status of calibration
and does need to have every bank that is needed for calibrations.
Regards, Stepan
Lamiaa El Fassi wrote:
> Hi,
>
> Since I am cleaning a claseg6 work disk for the upcoming Pass0
> cooking, I am planning
> to delete the output files of the elastic runs that I have cooked for
> the RTPC calibration
> next Monday. I have already checked with Raphael and he claimed that
> he has all what
> he needs at Argonne.
>
> Thank you,
>
> Lamiaa
>
> ************************************************************
> * Lamiaa El Fassi email: elfassi at jlab.org
> <mailto:elfassi at jlab.org>
> * Research Associate @ Rutgers University
> * Phone: (757) 269-7011 // Fax: (757) 269-5703
> * Jefferson Lab., 12000 Jefferson Ave.
> * Suite# 4, MS 12H3
> * Newport News, VA. 23606
> ************************************************************
>
>
> 2010/4/13 Hovanes Egiyan <hovanes.egiyan at gmail.com
> <mailto:hovanes.egiyan at gmail.com>>
>
> The RTPC calibration files are in
> /work/clas/claseg6/rtpc_calib/epass_v01/ directory
>
>
> Hi Raphael,
>
> Just a short notice to let you know that all the required cooked
> files reside now on claseg6 work directory that I mentioned earlier.
>
> Cheers,
>
> Lamiaa
>
> ************************************************************
> * Lamiaa El Fassi email: elfassi at jlab.org
> <mailto:elfassi at jlab.org>
> * Research Associate @ Rutgers University
> * Phone: (757) 269-7011 // Fax: (757) 269-5703
> * Jefferson Lab., 12000 Jefferson Ave.
> * Suite# 4, MS 12H3
> * Newport News, VA. 23606
> ************************************************************
>
>
> 2010/3/24 Lamiaa El Fassi <elfassi at jlab.org <mailto:elfassi at jlab.org>>
>
> Hi Raphael,
>
> I have saved the new output files of elastic runs at the
> following directory in claseg6 work disk:
> /work/clas/claseg6/rtpc_calib/epass_v01/.
> For the moment, approximately 80% of the cooked files are
> already there. However, the remaining 20% is still under
> process. This portion of incomplete jobs is mainly caused by
> random crashes
> that happened in the last few days.
>
> Best regards,
>
> Lamiaa
>
> ************************************************************
> * Lamiaa El Fassi email: elfassi at jlab.org
> <mailto:elfassi at jlab.org>
> * Research Associate @ Rutgers University
> * Phone: (757) 269-7011 // Fax: (757) 269-5703
> * Jefferson Lab., 12000 Jefferson Ave.
> * Suite# 4, MS 12H3
> * Newport News, VA. 23606
> ************************************************************
>
>
> 2010/3/18 Lamiaa El Fassi <elfassi at jlab.org
> <mailto:elfassi at jlab.org>>
>
> Hi Hovanes and Raphael,
>
> I will launch this set of runs today and save them in
> claseg6 work
> disk. Since Raphael is using only the hbook files in his
> calibration,
> I will reproduce only the hbook and reduced BOS files to
> gain some
> processing time and disk space.
>
> Best regards,
>
> Lamiaa
>
> ************************************************************
> * Lamiaa El Fassi email: elfassi at jlab.org
> <mailto:elfassi at jlab.org>
> * Research Associate @ Rutgers University
> * Phone: (757) 269-7011 // Fax: (757) 269-5703
>
> * Jefferson Lab., 12000 Jefferson Ave.
> * Suite# 4, MS 12H3
> * Newport News, VA. 23606
> ************************************************************
>
>
> 2010/3/18 Hovanes Egiyan <hovanes.egiyan at gmail.com
> <mailto:hovanes.egiyan at gmail.com>>
>
> Thanks Raphael,
>
> and we need to add the tpcc.ddl file for the TPCC bank
> at some point.
>
> Hovanes
>
>
>
> On 3/18/2010 11:10 AM, Dupré Raphaël wrote:
>> Hi,
>>
>> The runs are from 61448 to 61481. The TPCC bank is
>> the TPC calibration bank that I use. The TPC6 bank is
>> not needed as the info unpacked are in the TPC bank,
>> normally TPC and TPCC bankshould also contain same
>> data (with more information in TPCC) but I prefer to
>> keep both because i am not sur the TPCC bank contain
>> all the info from TPC.
>>
>> Summary: I need TPCC, you do not need to keep TPC6
>> and i think we should keep TPC.
>>
>> Regards,
>>
>> Raphael
>>
>> 2010/3/18 Hovanes Egiyan <hovanes.egiyan at gmail.com
>> <mailto:hovanes.egiyan at gmail.com>>
>>
>> Hi Lamiaa,
>>
>> Raphael told me that his files at ANL got lost. I
>> think the
>> easiest way to recover these files is to recook
>> them and
>> keep them on the eg6 work disk at JLab. This time
>> we need to
>> keep only higher level reconstruction banks to
>> reduce the space, but
>> still keep RTPC raw banks (TPC TPC6).
>> I would suggest not writing the following
>> low-level banks from RTPC
>> calibration cooking:
>>
>> CC CC01DC0 DC1 EC1RTGEOEC EC1 SC1 IC IC0 SC
>> TDPLTBLA
>>
>> Raphael, could you give Lamiaa the list of runs
>> to be cooked for
>> RTPC calibrations? Also what is a TPCC bank, is
>> there such a bank and
>> do we need it ?
>>
>> Thanks,
>> Hovanes.
>>
>>
>>
>>
>> --
>> Raphaël Dupré
>>
>>
>> Argonne National Laboratory
>>
>> Université Claude Bernard Lyon 1
>
>
>
>
>
> _______________________________________________
> Lowq mailing list
> Lowq at jlab.org <mailto:Lowq at jlab.org>
> https://mailman.jlab.org/mailman/listinfo/lowq
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Lowq mailing list
> Lowq at jlab.org
> https://mailman.jlab.org/mailman/listinfo/lowq
More information about the Lowq
mailing list