<div>Hi Stepan,</div>
<div> </div>
<div>As Hovanes suggested, the plan for a Pass 0 cooking is to cook every production run </div>
<div>from the 4th of November until the end of running period. There is approximately 300 runs. </div>
<div>For each run we will process 10 files and store the HBOOK and ANAMONHIST files in </div>
<div>the claseg6 permanent work disk. That means we may need 900 GB of claseg6 disk space. </div>
<div>I already managed to empty approximately 1 TB. So, I can keep the other files until further use. <br>However, the BOS, ROOT and LOG files will be copied to the work disks. </div>
<div>Following the same plan, before doing a full Pass 0 we will do a test cooking where I will cook </div>
<div>some 10 files from runs 61694, 61695, 61696 & 61698 and after checking that everything is fine especially with the calibration, I will proceed with the Pass0 cooking. </div>
<div> </div>
<div>I put in attachment two tcl files that I am willing to use on the cooking test and the Pass0. </div>
<div>Please look at the list of bosbanks and the tcl flags that I am turning on both of them, </div>
<div>and tell me what do you think?</div>
<div> </div>
<div>Best regards,</div>
<div> </div>
<div>Lamiaa</div>
<div> </div>
<div>************************************************************<br>* Lamiaa El Fassi email: <a href="mailto:elfassi@jlab.org">elfassi@jlab.org</a><br>* Research Associate @ Rutgers University <br>
* Phone: (757) 269-7011 // Fax: (757) 269-5703 <br>* Jefferson Lab., 12000 Jefferson Ave. <br>* Suite# 4, MS 12H3<br>* Newport News, VA. 23606<br>************************************************************<br>
<br><br></div>
<div class="gmail_quote">On Sat, Apr 17, 2010 at 1:51 PM, Stepan Stepanyan <<a href="mailto:stepanya@jlab.org">stepanya@jlab.org</a>> wrote:<br>
<blockquote class="gmail_quote">Hi Lamiaa,<br><br>Do we really need to clean every thing up.<br>Can you estimate how much space do you need for pass0.<br>
I think we should discuss what banks and what events we<br>want to save and in which formats for pass0.<br>This pass0 cooking will be to monitor status of calibration<br>and does need to have every bank that is needed for calibrations.<br>
<br>Regards, Stepan<br><br>Lamiaa El Fassi wrote:<br>
<blockquote class="gmail_quote">
<div>Hi,<br> Since I am cleaning a claseg6 work disk for the upcoming Pass0 cooking, I am planning<br>to delete the output files of the elastic runs that I have cooked for the RTPC calibration<br>next Monday. I have already checked with Raphael and he claimed that he has all what<br>
he needs at Argonne.<br> Thank you,<br> Lamiaa<br><br>************************************************************<br></div>* Lamiaa El Fassi email: <a href="mailto:elfassi@jlab.org">elfassi@jlab.org</a> <mailto:<a href="mailto:elfassi@jlab.org">elfassi@jlab.org</a>>
<div><br>* Research Associate @ Rutgers University * Phone: (757) 269-7011 // Fax: (757) 269-5703 * Jefferson Lab., 12000 Jefferson Ave. * Suite# 4, MS 12H3<br>* Newport News, VA. 23606<br>
************************************************************<br><br><br></div>2010/4/13 Hovanes Egiyan <<a href="mailto:hovanes.egiyan@gmail.com">hovanes.egiyan@gmail.com</a> <mailto:<a href="mailto:hovanes.egiyan@gmail.com">hovanes.egiyan@gmail.com</a>>>
<div><br><br> The RTPC calibration files are in<br> /work/clas/claseg6/rtpc_calib/epass_v01/ directory<br><br><br> Hi Raphael,<br> Just a short notice to let you know that all the required cooked<br> files reside now on claseg6 work directory that I mentioned earlier.<br>
Cheers,<br> Lamiaa<br><br> ************************************************************<br> * Lamiaa El Fassi email: <a href="mailto:elfassi@jlab.org">elfassi@jlab.org</a><br>
</div> <mailto:<a href="mailto:elfassi@jlab.org">elfassi@jlab.org</a>>
<div><br> * Research Associate @ Rutgers University * Phone: (757) 269-7011 // Fax: (757) 269-5703 * Jefferson Lab., 12000 Jefferson Ave. * Suite# 4, MS 12H3<br> * Newport News, VA. 23606<br>
************************************************************<br><br><br></div> 2010/3/24 Lamiaa El Fassi <<a href="mailto:elfassi@jlab.org">elfassi@jlab.org</a> <mailto:<a href="mailto:elfassi@jlab.org">elfassi@jlab.org</a>>>
<div><br><br> Hi Raphael,<br> I have saved the new output files of elastic runs at the<br> following directory in claseg6 work disk:<br> /work/clas/claseg6/rtpc_calib/epass_v01/.<br> For the moment, approximately 80% of the cooked files are<br>
already there. However, the remaining 20% is still under<br> process. This portion of incomplete jobs is mainly caused by<br> random crashes<br> that happened in the last few days.<br> Best regards,<br>
Lamiaa<br> ************************************************************<br> * Lamiaa El Fassi email: <a href="mailto:elfassi@jlab.org">elfassi@jlab.org</a><br>
</div> <mailto:<a href="mailto:elfassi@jlab.org">elfassi@jlab.org</a>>
<div><br> * Research Associate @ Rutgers University * Phone: (757) 269-7011 // Fax: (757) 269-5703 * Jefferson Lab., 12000 Jefferson Ave. * Suite# 4, MS 12H3<br>
* Newport News, VA. 23606<br> ************************************************************<br><br><br> 2010/3/18 Lamiaa El Fassi <<a href="mailto:elfassi@jlab.org">elfassi@jlab.org</a><br>
</div> <mailto:<a href="mailto:elfassi@jlab.org">elfassi@jlab.org</a>>>
<div><br><br> Hi Hovanes and Raphael,<br> I will launch this set of runs today and save them in<br> claseg6 work<br> disk. Since Raphael is using only the hbook files in his<br>
calibration,<br> I will reproduce only the hbook and reduced BOS files to<br> gain some<br> processing time and disk space.<br> Best regards,<br> Lamiaa<br>
<br> ************************************************************<br> * Lamiaa El Fassi email: <a href="mailto:elfassi@jlab.org">elfassi@jlab.org</a><br></div> <mailto:<a href="mailto:elfassi@jlab.org">elfassi@jlab.org</a>>
<div><br> * Research Associate @ Rutgers University * Phone: (757) 269-7011 // Fax: (757) 269-5703 * Jefferson Lab., 12000 Jefferson Ave. * Suite# 4, MS 12H3<br>
* Newport News, VA. 23606<br> ************************************************************<br><br><br> 2010/3/18 Hovanes Egiyan <<a href="mailto:hovanes.egiyan@gmail.com">hovanes.egiyan@gmail.com</a><br>
</div> <mailto:<a href="mailto:hovanes.egiyan@gmail.com">hovanes.egiyan@gmail.com</a>>>
<div><br><br> Thanks Raphael,<br><br> and we need to add the tpcc.ddl file for the TPCC bank<br> at some point.<br><br> Hovanes<br><br><br><br> On 3/18/2010 11:10 AM, Dupré Raphaël wrote:<br>
</div>
<blockquote class="gmail_quote">
<div> Hi,<br><br> The runs are from 61448 to 61481. The TPCC bank is<br> the TPC calibration bank that I use. The TPC6 bank is<br> not needed as the info unpacked are in the TPC bank,<br>
normally TPC and TPCC bankshould also contain same<br> data (with more information in TPCC) but I prefer to<br> keep both because i am not sur the TPCC bank contain<br> all the info from TPC.<br>
<br> Summary: I need TPCC, you do not need to keep TPC6<br> and i think we should keep TPC.<br><br> Regards,<br><br> Raphael<br><br> 2010/3/18 Hovanes Egiyan <<a href="mailto:hovanes.egiyan@gmail.com">hovanes.egiyan@gmail.com</a><br>
</div> <mailto:<a href="mailto:hovanes.egiyan@gmail.com">hovanes.egiyan@gmail.com</a>>>
<div>
<div></div>
<div><br><br> Hi Lamiaa,<br><br> Raphael told me that his files at ANL got lost. I<br> think the<br> easiest way to recover these files is to recook<br>
them and<br> keep them on the eg6 work disk at JLab. This time<br> we need to<br> keep only higher level reconstruction banks to<br> reduce the space, but<br>
still keep RTPC raw banks (TPC TPC6).<br> I would suggest not writing the following<br> low-level banks from RTPC<br> calibration cooking:<br><br> CC CC01DC0 DC1 EC1RTGEOEC EC1 SC1 IC IC0 SC<br>
TDPLTBLA<br><br> Raphael, could you give Lamiaa the list of runs<br> to be cooked for<br> RTPC calibrations? Also what is a TPCC bank, is<br> there such a bank and<br>
do we need it ?<br><br> Thanks,<br> Hovanes.<br><br><br><br><br> -- Raphaël Dupré<br><br><br> Argonne National Laboratory<br>
<br> Université Claude Bernard Lyon 1<br></div></div></blockquote><br><br><br><br><br> _______________________________________________<br> Lowq mailing list<br> <a href="mailto:Lowq@jlab.org">Lowq@jlab.org</a> <mailto:<a href="mailto:Lowq@jlab.org">Lowq@jlab.org</a>>
<div><br> <a href="https://mailman.jlab.org/mailman/listinfo/lowq">https://mailman.jlab.org/mailman/listinfo/lowq</a><br><br><br></div>------------------------------------------------------------------------
<div><br><br>_______________________________________________<br>Lowq mailing list<br><a href="mailto:Lowq@jlab.org">Lowq@jlab.org</a><br><a href="https://mailman.jlab.org/mailman/listinfo/lowq">https://mailman.jlab.org/mailman/listinfo/lowq</a><br>
</div></blockquote></blockquote></div><br>