[Moller] chillers, vacuum

[Jay Benesch]

Material promised at spectrometer meeting:


https://www.smcusa.com/products/chillers/

but either my memory failed or they removed the big chillers from their 
line.  Largest now is 28 kW.  We're using small ones for the MO system.

https://www.huber-online.com/us/cs-chiller.aspx has one that can cool 70 
kW and maintain 15 C.

https://www.topchiller.com/recirculating-water-chiller/ goes to 240 kW

------------------
https://www.agilent.com/en/product/vacuum-technologies/turbo-pumps-controllers/turbo-pumps/twistorr-305-fs-turbo-pump 

  Linacs have water cooled version as that temperature is constant while 
air at ends of linacs is warm due to magnets.  The only turbo failure 
I'm sure of was due to someone not opening the water valve after a down. 
  We now have a software alarm on turbo temp.  There may have been a 
second.

https://www.agilent.com/en/product/vacuum-technologies/turbo-pumps-controllers/turbo-pump-controllers/twistorr-305-fs-remote-controller

https://www.agilent.com/en/product/vacuum-technologies/dry-scroll-pumps/triscroll-pumps
   Buying TriScroll 300 for linacs now.  TriScroll 600 also available.
Scroll tips are replaced annually due to radiation damage.

https://www.agilent.com/en/product/vacuum-technologies
  top vacuum page.  IDP scroll pumps are the ones that had cooling fans 
fail due to radiation damage to fan microcontroller.

Rick Gonzales designed an instrumentation chassis connecting to 
Instrutech TC gauge on foreline and a right angle valve to make sure the 
turbo didn't turn into a helicopter.  Software to interface to this and 
the TwissTorr controller exists.  Agilent software not purchased.
 From JMenu:
Operations -> Vacuum -> Insulating Vacuum
There are 15 zones with TEMP and a small blue button next to TEMP. 
These are the ones with Agilent systems.  Hitting the button brings up 
the turbo and instrumentation interface.  Scroll pumps are plugged into 
emergency power downstairs, no remote power control.  Where possible, 
turbo controllers are plugged into emergency power upstairs.  Emergency 
power is available only in selected racks and in some cases the distance 
is over 100' to closest outlet, so house power for those.