[Moller_intdet] Main detector light sealing design

[Michael Gericke]

Hello again,

Sorry, apparently the ppt file was too large ...

As I mentioned in the detector meeting on Tuesday, pretty much the last 
topic that needs to be finalized for the main detector modules before we 
can start production is the light sealing.
We are extremely constrained in what we can do, because of tight 
clearances between detector modules during the segment insertion 
process. So the light sealing design cannot introduce
significant additional structure around the existing modules design.

I also mentioned that I would prefer to nail the light sealing design 
down as  fast as possible. Since there wasn't any time to discuss this 
in detail on Tuesday, I am attaching a short presentation
illustrating the current concept.

To make it easier to understand what I am proposing, I also made a story 
board video of the assembly, using the ring 4 module as an example.   
The second link below can be used by UofM people
who do not currently have access to the JLab sharepoint site.

I will present this today, in the detector mechanics meeting, but I know 
that several people cannot make it. So I am sending the presentation to 
the detector group.

Let me know if you have any comments or suggestions.

Thanks,

Michael


JLab Sharepoint Link

https://jeffersonlab.sharepoint.com/:v:/r/sites/MOLLER/Shared%20Documents/Main%20Detector%20Documentation/MOLLER-Ring4-Assembly.mp4?csf=1&web=1&e=v76Xwx

UofM Sharepoint Link

https://umanitoba.sharepoint.com/:v:/r/sites/MOLLERSpectrometer/Shared%20Documents/Integrating%20detectors/TwoSegmentCAD-August2023/MOLLER-Ring4-Assembly.mp4?csf=1&web=1&e=bAGjgR

-------------- next part --------------
A non-text attachment was scrubbed...
Name: R4-Assembly-LightSealing.pdf
Type: application/pdf
Size: 1479345 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/moller_intdet/attachments/20230907/ccbf0bc4/attachment-0001.pdf>