<div dir="ltr"><div class="gmail_default" style="font-size:small">Dear NPWGers,<br><br>I have some undergraduates working for me this summer on some CLAS12 related projects who want to present posters at the Conference Experience for Undergraduates (CEU) held at the fall, DNP meeting. The CEU due date is August 1. Drafts of their abstracts are below for your comments. Let me know what you think.<br><br>Jerry Gilfoyle<br><br>---<br><br clear="all"></div>Dual Target Design for CLAS12 $^1$ OMAIR ALAM, GERARD GILOYLE, <br>University of Richmond, STEVE CHRISTO, Jefferson Lab –  An experiment <br>to measure the neutron magnetic form factor ($G^M_n$) is planned for <br>the new CLAS12 detector in Hall B at Jefferson Lab. This form factor <br>will be extracted from the ratio of the quasielastic electron-neutron <br>to electron-proton scattering off a liquid deuterium ($LD_2$) target. <br>A collinear liquid hydrogen ($LH_2$) target will be used to measure <br>efficiencies at the same time as production data is collected from the <br>$LD_2$ target. To test target designs we have simulated CLAS12 and the <br>target geometry. Electron-nucleon events are produced first with the <br>QUasiElastic Event Generator (QUEEG) which models the internal motion <br>of the nucleons in deuterium.$^2$ The results are used as input to the <br>CLAS12 Monte Caro code gemc; a Geant4-based program that simulates the <br>particle’s interactions with each component of CLAS12 including the <br>target material. The dual target geometry has been added to gemc <br>including support structures and cryogenic transport systems. A Perl <br>script was written to define the target materials and geometries. The <br>output of the script is a set of database entries read by gemc at <br>runtime. An initial study of the impact of this dual-target structure <br>revealed limited effects on the electron momentum and angular <br>resolutions.<br><br>1 Work supported by the University of Richmond and the US Department<br>of Energy.<br><br><br><br>Study of the Neutron Detection Efficiency for the CLAS12 Detector$^1$ <br>KEEGAN SHERMAN, GERARD GILFOYLE, University of Richmond -<br>One of the central physics goals of Jefferson Lab is to understand how<br>quarks and gluons form nuclei. The 12 GeV upgrade is nearing completion<br>and a new detector, CLAS12, is being built in Hall B. One of the approved<br>experiments will measure the magnetic form factor of the neutron. To make<br>this measurement, we will extract the ratio of electron-neutron (e-n) to<br>electron-proton (e-p) scattering events from deuterium in quasi-elastic kine-<br>matics. A major source of systematic uncertainty is the neutron detection<br>efficiency (NDE) of CLAS12. To better understand the NDE we used the<br>Monte Carlo code gemc to simulate quasi-elastic e-n events like those ex-<br>pected in the experiment. We then analyzed the simulated e-n events by<br>using the measured, scattered electron information to predict the neutron’s<br>path. The neutron is detected in CLAS12’s electromagnetic calorimeter (EC). <br>If the predicted neutron path intersected the fiducial volume of the EC, we <br>searched for a hit near that point. The NDE is the ratio of the number of <br>neutrons found in the EC to the number of neutrons predicted to hit the EC. <br>The analysis was done using the newly released CLAS12 reconstruction tools. <br>We observe a rapid rise in the NDE at low neutron momentum and a plateau <br>above 60%.<br><br>1 Work supported by the University of Richmond and the US Department<br>of Energy.<br><br><br><br>Cryotarget Control Software for Liquid Deuterium^1 DAVID BRAKMAN, GERARD <br>GILFOYLE, University of Richmond; CHRIS CUEVAS, STEVE CHRISTO, Jefferson <br>Lab - One of the experiments in Hall B at Jefferson Lab will measure the <br>neutron elastic magnetic form factor with a 12 GeV electron beam striking <br>a liquid deuterium target (LD2) and measuring the resulting debris in the <br>CEBAF Large Acceptance Spectrometer (CLAS12). A program was created that <br>acts as a control system for the LD2 target. It will monitor the <br>deuterium target and send data to the main control system and the shift <br>workers monitoring the experiment in real time. The data include <br>measurements of pressure, temperature, and liquid level. The system will <br>also control setpoints for temperature, heater power, and other parameters <br>as well as download calibration curves. The program was written in LabVIEW, <br>a graphical programming language noted for readily interfacing with lab <br>equipment. This project has completed two stages so far. Simulated data <br>was generated within LabVIEW and passed to subroutines that send, log, and <br>display data. In the second stage, the PC was connected to a data <br>acquisition (DAQ) board, and test signals were read and analyzed to <br>simulate the target sensors.<br><br>1 Work supported by the University of Richmond and the US Department<br>of Energy.<br><br><br>-- <br><div class="gmail_signature">Dr. Gerard P. Gilfoyle<br>Physics Department                <br>University of Richmond, VA 23173  USA <br>e-mail: <a href="mailto:ggilfoyl@richmond.edu" target="_blank">ggilfoyl@richmond.edu</a><br>phone:  804-289-8255<br>fax:    804-484-1542</div>
</div>