[Pansophy] P1 Window/Waveguide Weld Traveler

[Kurt Macha]

Valerie,

I added the waveguide serial number.  Thank you good catch. I missed this.

Kurt
________________________________
From: Valerie Bookwalter <bookwalt at jlab.org>
Sent: Thursday, August 6, 2020 10:26 AM
To: Scott Williams <scott at jlab.org>
Cc: Kurt Macha <macha at jlab.org>; pansophy <pansophy at jlab.org>
Subject: P1 Window/Waveguide Weld Traveler


Scott (& Kurt),



A couple questions about the WELD traveler…

The traveler has INSP, CHEM, EBW and LEAK steps.

Does the CHEM group have a traveler for cleaning parts?

Does Jim F have an EBW traveler?

And who is doing the LEAK check? Does this need to be separate?



This is a good traveler for following the machining of the part, checking that steps are done along the way, but there should be some traveler for CHEM, EBW and LEAK.

A simple 1 pages would work.



Also, does the waveguide have a serial number? I don’t see that in the traveler.

Please let me know…





Valerie
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20200806/66d654ff/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: P1-COMP-WGWIN-WELD.docx
Type: application/vnd.openxmlformats-officedocument.wordprocessingml.document
Size: 206657 bytes
Desc: P1-COMP-WGWIN-WELD.docx
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20200806/66d654ff/attachment-0001.docx>