[Pansophy] Fw: HP1 documentation PPU01

[Ed Daly]

Dear Pansophy Team,
The first batch of cavity data for the first cavity is uploaded.  Please review and provide comments back to me.

The first cavity will go to surface treatment after John M's approval.
Cheers,
Ed

________________________________
From: Navitski, Alexander <Alexander.Navitski at research-instruments.de>
Sent: Thursday, August 6, 2020 4:49 PM
To: Ed Daly <edaly at jlab.org>; Mammosser, John <mammosserjd at ornl.gov>
Subject: [EXTERNAL] HP1 documentation PPU01




   Dear John and Ed,



   we have uploaded the first HP1 batch of data for PPU01 cavity.



   Please note there are few minor modifications of the templates and accordingly reports:

  1.  There will be no data V_F_xxx and V_S_xxx. These measurements are done a spot check and all the available data will be submitted later in one batch with no sorting to cavities.
  2.  There will be no data W_M_xxx. This template was foreseen for the length measurements of components. The length results is now integrated into W_F_xxx reports are therefore not required or would be double.



   Please review the reports and let us know if you have any questions or remarks.



   John, please approve formally the cavity to move to the surface treatment. This is an official milestone.



   Thank you!



   Best regards, Alexander.




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20200806/6b487a64/attachment-0001.html>