[Pansophy] AUP Travelers

[Matthew Weaks]

Hey Mike,

I believe I may have made an error with the previous drawing, JL0090344 - Feedthrough Pince Cable 25ohm is listed in it's traveler as CABL, while JL0089757 - HOM Feedthrough 25 Ohm Pince is listed as FTPCSN,

Sorry for that,

Thanks guys!
________________________________
From: Mike Dickey <mdickey at jlab.org>
Sent: Tuesday, July 7, 2020 1:19 PM
To: Naeem Huque <huque at jlab.org>
Cc: Matthew Weaks <weaksmc at jlab.org>; George DeKerlegand <georged at jlab.org>; Scott Williams <scott at jlab.org>; pansophy <pansophy at jlab.org>; Danny Forehand <forehand at jlab.org>; Megan McDonald <megan at jlab.org>
Subject: RE: AUP Travelers


Naeem,



Based on the information that Matt supplied, I checked the system and we have 2 different parts with FTPCSN.  We have,



4, JL0090344 - Feedthrough Pince Cable 25 Ohm

and

3, JL0089757 – HOM Feedthrough 25 Ohm Pince



Which have already been checked into PRIMeS.  Can you suggest a change to one of the acronyms the help distinguish them?



Mike Dickey

SRF Inventory Technician

Jefferson Lab
12000 Jefferson Ave
Newport News, VA 23606
(757) 269-7755



From: Pansophy <pansophy-bounces at jlab.org> On Behalf Of Matthew Weaks
Sent: Tuesday, July 7, 2020 11:16 AM
To: Megan McDonald <megan at jlab.org>
Cc: Naeem Huque <huque at jlab.org>; George DeKerlegand <georged at jlab.org>; Scott Williams <scott at jlab.org>; pansophy <pansophy at jlab.org>; Danny Forehand <forehand at jlab.org>
Subject: Re: [Pansophy] AUP Travelers



Hey Megan,



Thanks for this, I've attached the drawing JL0090344 - Feedthrough Pince Cable 25ohm,



Please let me know if I can provide anything else!



-Matt



________________________________

From: Megan McDonald <megan at jlab.org<mailto:megan at jlab.org>>
Sent: Tuesday, July 7, 2020 10:43 AM
To: Matthew Weaks <weaksmc at jlab.org<mailto:weaksmc at jlab.org>>
Cc: Naeem Huque <huque at jlab.org<mailto:huque at jlab.org>>; pansophy <pansophy at jlab.org<mailto:pansophy at jlab.org>>; Scott Williams <scott at jlab.org<mailto:scott at jlab.org>>; Danny Forehand <forehand at jlab.org<mailto:forehand at jlab.org>>; George DeKerlegand <georged at jlab.org<mailto:georged at jlab.org>>
Subject: AUP Travelers



Matt,



Here are the travelers edited.

•        For the INSP, I’m assuming they need some dimensional fields in there so I have CC’d Aaron to maybe help on that.

•        For the DSCCRM, the heat treatment should be in a separate FAB traveler and I have CC’d Danny and Scott for that.

•        For the FTPCSN, can you please send the drawing so we can figure out the appropriate acronym?



Thanks!

Megan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20200707/f94b91d6/attachment.html>