[Pansophy] SNS PPU Cold Mass Assembly BOM

[Katherine Wilson]

Ok by me.

Katherine

From: Gary Cheng <cheng at jlab.org>
Sent: Tuesday, March 24, 2020 2:27 PM
To: Ed Daly <edaly at jlab.org>; pansophy <pansophy at jlab.org>
Cc: Katherine Wilson <kwilson at jlab.org>
Subject: Re: SNS PPU Cold Mass Assembly BOM

Hi Ed and all,

SOW 104211500-M8U-8200-A002, see attached, covers one cold mass assy kit, i.e. the Cold Mass Assembly Machined Parts, 2 final assembly kits, i.e. Final Assembly Supply Piping and Final Assembly Return Piping, and a Guard Vacuum Piping Assembly also used at the final assembly level. I included the final assembly level parts to this SOW because they are similar in nature to the cold mass machined parts. Using one combined SOW makes procurement simpler.

Regards,
Gary
On 3/24/2020 2:14 PM, Ed Daly wrote:
Hi Gary,
Wo yao le hen hao!

Does the SOW define the names for the kits?  If so, you should provide these names to Mike,er... the pansophy team. 🙂
Thanks,
Ed

________________________________
From: Gary Cheng <cheng at jlab.org><mailto:cheng at jlab.org>
Sent: Tuesday, March 24, 2020 2:10 PM
To: Ed Daly <edaly at jlab.org><mailto:edaly at jlab.org>; pansophy <pansophy at jlab.org><mailto:pansophy at jlab.org>
Cc: Katherine Wilson <kwilson at jlab.org><mailto:kwilson at jlab.org>
Subject: Re: SNS PPU Cold Mass Assembly BOM

Hi Ed,

How about this version?

Gary
On 3/24/2020 2:07 PM, Ed Daly wrote:
Dear Gary,
Why did you remove any kit definitions?
-Ed

________________________________
From: Gary Cheng <cheng at jlab.org><mailto:cheng at jlab.org>
Sent: Tuesday, March 24, 2020 12:22 PM
To: pansophy <pansophy at jlab.org><mailto:pansophy at jlab.org>
Cc: Katherine Wilson <kwilson at jlab.org><mailto:kwilson at jlab.org>; Ed Daly <edaly at jlab.org><mailto:edaly at jlab.org>
Subject: SNS PPU Cold Mass Assembly BOM

Hi Mike, Valerie and Megan,

I have cleaned up the cold mass assy BOM shown this morning. Please see attached
Please let me know if you have any questions about this BOM.

Thanks,
Gary


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20200324/1e1cf64c/attachment.html>