[Pansophy] P1 Window to Waveguide Welding

[Kurt Macha]

Allen,

Sorry about that.  I looked in Pansophy and the last revision was so minor I think Valerie just changed it on the fly with out doing a revision.  So I edited and made this R2.  I made an entry in the revision block to reflect the change.  This again is a very minor change and doesn't change any entry fields.

Kurt
________________________________
From: Scott Williams <scott at jlab.org>
Sent: Wednesday, October 7, 2020 11:43 AM
To: SRF Pansophy (pansophy at jlab.org) <pansophy at jlab.org>; Kurt Macha <macha at jlab.org>
Cc: Ed Daly <edaly at jlab.org>; Jim Follkie <follkiej at jlab.org>; Adam O'Brien <aobrien at jlab.org>; Tony Reilly <areilly at jlab.org>; E. Anne McEwen <mcewen at jlab.org>
Subject: Re: P1 Window to Waveguide Welding

Thanks Kurt........

Get Outlook for Android<https://aka.ms/ghei36>

________________________________
From: Kurt Macha <macha at jlab.org>
Sent: Wednesday, October 7, 2020 10:30:30 AM
To: SRF Pansophy (pansophy at jlab.org) <pansophy at jlab.org>
Cc: Ed Daly <edaly at jlab.org>; Jim Follkie <follkiej at jlab.org>; Adam O'Brien <aobrien at jlab.org>; Tony Reilly <areilly at jlab.org>; E. Anne McEwen <mcewen at jlab.org>; Scott Williams <scott at jlab.org>
Subject: Re: P1 Window to Waveguide Welding

Panspohy Team,

An edit to the attached traveler has been made.  Please submit for approval and convert into Pansophy.  I did not upload this into DocuShare.

Kurt
________________________________
From: Scott Williams <scott at jlab.org>
Sent: Wednesday, October 7, 2020 8:49 AM
To: Kurt Macha <macha at jlab.org>
Cc: Ed Daly <edaly at jlab.org>; Jim Follkie <follkiej at jlab.org>; Adam O'Brien <aobrien at jlab.org>; Tony Reilly <areilly at jlab.org>; E. Anne McEwen <mcewen at jlab.org>
Subject: P1 Window to Waveguide Welding

Kurt,
Can you please add these additional sentences and sign-off box in the P1-WELD-WIN-ASSY Traveler . Location for this addition should follow the  first sentence in Step 2.  The reason for the addition is due to  observing severe metal deposition onto the ceramic window after welding the SS Weld Adapter  into the window frame. This conductive coating will kill the window performance and must be avoided.


  *   EBW Technician is to insure that the "primary" two piece split niobium ceramic mask is installed & taped into place using Kapton tape. In addition to the primary shielding, a "secondary" niobium A-Frame shield is to be installed in the rectangular pocket for additional shielding  prior to welding.

Thanks,
Scott
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20201007/4e0cc5fd/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: P1-WELD-WIN-ASSY-R2.docx
Type: application/vnd.openxmlformats-officedocument.wordprocessingml.document
Size: 204290 bytes
Desc: P1-WELD-WIN-ASSY-R2.docx
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20201007/4e0cc5fd/attachment-0001.docx>