[Pansophy] F100 Inserts

[Megan McDonald]

Yes, that traveler is in Pansophy

Megan

From: E. Anne McEwen <mcewen at jlab.org>
Sent: Tuesday, October 27, 2020 8:10 AM
To: Megan McDonald <megan at jlab.org>
Cc: Valerie Bookwalter <bookwalt at jlab.org>; Scott Williams <scott at jlab.org>; pansophy <pansophy at jlab.org>
Subject: RE: F100 Inserts

An alternative would be since it is only a few measurements , is to put the data into the final window assembly traveler
According to the master list it is available - but there is a note about C100R
The measurements on the flange are really only for reference - don't have to be precise if Scott is allowing calipers

Inspection RF Window Welded Assembly
C100R-INSP-WIN

Can you confirm if this traveler is available ? Sorry about the problems with this one

Thanks Anne

From: Megan McDonald <megan at jlab.org<mailto:megan at jlab.org>>
Sent: Tuesday, October 27, 2020 8:06 AM
To: E. Anne McEwen <mcewen at jlab.org<mailto:mcewen at jlab.org>>
Cc: Valerie Bookwalter <bookwalt at jlab.org<mailto:bookwalt at jlab.org>>; Scott Williams <scott at jlab.org<mailto:scott at jlab.org>>; pansophy <pansophy at jlab.org<mailto:pansophy at jlab.org>>
Subject: RE: F100 Inserts

DSRF is in Pansophy.

Last I heard, Scott said he was holding off on the WINM because it was for modifications and it had to be rewritten.

I CC'd Pansophy on this to keep Allen in the loop.

Megan

From: E. Anne McEwen <mcewen at jlab.org<mailto:mcewen at jlab.org>>
Sent: Tuesday, October 27, 2020 8:03 AM
To: Megan McDonald <megan at jlab.org<mailto:megan at jlab.org>>
Cc: Valerie Bookwalter <bookwalt at jlab.org<mailto:bookwalt at jlab.org>>; Scott Williams <scott at jlab.org<mailto:scott at jlab.org>>
Subject: RE: F100 Inserts

It could be either of these two travelers, if you could let me know the status (still out for editing ? )  I would appreciate this  .

Inspection Double Sided Rectangular Flange
C100R-INSP-DSRF
Inspection Modified Window
P1-INSP-WINM


From: E. Anne McEwen
Sent: Tuesday, October 27, 2020 8:01 AM
To: Megan McDonald <megan at JLAB.ORG<mailto:megan at JLAB.ORG>>
Cc: Valerie Bookwalter <bookwalt at jlab.org<mailto:bookwalt at jlab.org>>; Scott Williams <scott at jlab.org<mailto:scott at jlab.org>>
Subject: FW: F100 Inserts

Hi Megan

Could you let me know the current status of the traveler , according to the Master list its out for editing still

P1-INSP-WINM


From: E. Anne McEwen <mcewen at jlab.org<mailto:mcewen at jlab.org>>
Sent: Tuesday, October 27, 2020 7:36 AM
To: Scott Williams <scott at jlab.org<mailto:scott at jlab.org>>
Cc: Earl Mosby <mosby at jlab.org<mailto:mosby at jlab.org>>; Valerie Bookwalter <bookwalt at jlab.org<mailto:bookwalt at jlab.org>>
Subject: Re: F100 Inserts

Hi Scott
We don't have a traveler yet ( don't know the reasons)
Is there another traveler available such as the finished window where we could put a pdf of the data ?
Get Outlook for Android<https://aka.ms/ghei36>

________________________________
From: Scott Williams <scott at jlab.org<mailto:scott at jlab.org>>
Sent: Tuesday, October 27, 2020 5:39:09 AM
To: E. Anne McEwen <mcewen at jlab.org<mailto:mcewen at jlab.org>>
Subject: F100 Inserts

Anne,
We are about ready to need the (4) P1  Window CF Inserts that are in the QA Lab for Inspection. Most checks can be done with calipers other than the actual CF Knife edges. Can you please see if we  can have that done possibly by close of business on Thursday. Shouldn't require a whole lot of time.

Thanks,
Scott

Get Outlook for Android<https://aka.ms/ghei36>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20201027/7e842f2f/attachment.html>