[Pansophy] SNSPPU vac vessel travelers

[Mike Dickey]

Matt,

Looks good from my side.  Now follow the Traveler submission process and see how it goes.

Mike Dickey
SRF Inventory Technician
Jefferson Lab
12000 Jefferson Ave
Newport News, VA 23606
(757) 269-7755

From: Matt Marchlik <marchlik at jlab.org>
Sent: Friday, October 30, 2020 11:18 AM
To: Mike Dickey <mdickey at jlab.org>; pansophy <pansophy at jlab.org>
Subject: Re: SNSPPU vac vessel travelers

Thank you Mike,

How do these look now?

Matt

________________________________
From: Mike Dickey <mdickey at jlab.org<mailto:mdickey at jlab.org>>
Sent: Tuesday, October 27, 2020 7:34 AM
To: Matt Marchlik <marchlik at jlab.org<mailto:marchlik at jlab.org>>; pansophy <pansophy at jlab.org<mailto:pansophy at jlab.org>>
Subject: RE: SNSPPU vac vessel travelers


Hi Matt,



In the INSP traveler, I changed the acronym from SFRSN to VVSN.



In the LEAK traveler, the serial number selections needs to be added to step 1.



As for Survey & Alignment, they have performed measurements at Bluecrab, the TL North Receiving area, and in front of the Test Cave.  Pretty much where ever the vacuum vessel is setup.  I would suggest making the work center CMA, and let John Fischer coordinate with S&A to accomplish this task.



Also, the traveler nomenclature needs to be corrected/updated.



Mike Dickey

SRF Inventory Technician

Jefferson Lab
12000 Jefferson Ave
Newport News, VA 23606
(757) 269-7755



From: Pansophy <pansophy-bounces at mailman.jlab.org<mailto:pansophy-bounces at mailman.jlab.org>> On Behalf Of Matt Marchlik
Sent: Monday, October 26, 2020 4:11 PM
To: pansophy <pansophy at jlab.org<mailto:pansophy at jlab.org>>
Subject: [Pansophy] SNSPPU vac vessel travelers



Hi,



Here are the SNSPPU vacuum vessel travelers. There are two travelers, one inspection Traveler and one Leak Test Traveler. Please confirm that I have everything correct from a formatting scope.



However, the vac vessel is a large item that will need survey and alignment (S&A) to do the dimensional inspection. Does this require a change to the workstation from CMM to another work station or does the CMM station work with S&A to get the inspection done?



Thanks,

Matt
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20201030/fafbc0ec/attachment.html>