[Pansophy] FW: P100 Windows - serial numbers

[E. Anne McEwen]

Hello  Mike & Calvin

There are P1 windows coming to inspection from fabrication /Test , where the serial numbers need to be put into PRIMeS so that they will appear in the Traveler

Scott has listed the serial numbers below in his email (scroll down) , and t has advised that the  related traveler uses for a combination of all processes is C100-CAV-INSP-ASSY-WIN, where you will find the part numbers, drawings  etc. for this window

Could you please put these serial numbers into PRIMeS so they are available in the pull downs for Earl when he goes to inspect the windows

Thanks Anne



From: E. Anne McEwen
Sent: Friday, September 18, 2020 1:04 PM
To: Leonard Page <lpage at jlab.org>
Cc: Michael Drury <drury at jlab.org>; Earl Mosby <mosby at jlab.org>; Scott Williams <scott at jlab.org>; George DeKerlegand <georged at jlab.org>; Liang Zhao <lzhao at jlab.org>; John Fischer <fischer at jlab.org>
Subject: FW: P100 Windows

Hi Leonard

Earl is available to work on the measurements this afternoon  (as long as they don't require the CMM which is tied up with the C75 Pair)

- so we are coming to your work center to try and locate them based on the SN from Scott below

(Hopefully you are still on site )

Thanks Anne

From: Scott Williams <scott at jlab.org<mailto:scott at jlab.org>>
Sent: Friday, September 18, 2020 1:00 PM
To: E. Anne McEwen <mcewen at jlab.org<mailto:mcewen at jlab.org>>; Earl Mosby <mosby at jlab.org<mailto:mosby at jlab.org>>
Subject: Fwd: P100 Windows



Get Outlook for Android<https://aka.ms/ghei36>
________________________________
From: Scott Williams <scott at jlab.org<mailto:scott at jlab.org>>
Sent: Friday, September 18, 2020 11:35:21 AM
To: Michael Drury <drury at jlab.org<mailto:drury at jlab.org>>; Leonard Page <lpage at jlab.org<mailto:lpage at jlab.org>>
Cc: John Fischer <fischer at jlab.org<mailto:fischer at jlab.org>>
Subject: Re: P100 Windows

Thanks Leonard, I'm actually going to pick windows up Monday morning to proceed through work centers as needed. I need to  schedule out the remaining fabrication steps.
Scott
Get Outlook for Android<https://aka.ms/ghei36>

________________________________
From: Leonard Page <lpage at jlab.org<mailto:lpage at jlab.org>>
Sent: Friday, September 18, 2020 9:56:40 AM
To: Michael Drury <drury at jlab.org<mailto:drury at jlab.org>>
Cc: John Fischer <fischer at jlab.org<mailto:fischer at jlab.org>>; Scott Williams <scott at jlab.org<mailto:scott at jlab.org>>
Subject: P100 Windows

This series of window were previously within 1 or 2 degrees of original test done in April of 2016
0001 177 'C
0003 177 'C
0004 177 'C

200 series.
  219 164 'C
  220 167 'C
  221 160 'C
  222 160 'C
The low temperatures are consistent with this  batch of 200 series windows done between July and September of 2013 windows 201 thru 214 all ran between 150 'C and 167 'C

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20200918/9e79cb77/attachment.html>