[Pansophy] PPU-01 Cryomodule Changes SNSPPU-CMA-CMASS-ASSY Serial Number correction

[Naeem Huque]

Hi Valerie,

That sounds fine, I only asked about the CMASSSN because I saw it in the Cold Mass traveler without any dropdown options. I see that it has been fixed

Thanks,
Naeem
________________________________
From: Valerie Bookwalter <bookwalt at jlab.org>
Sent: Monday, April 5, 2021 3:32 PM
To: Naeem Huque <huque at jlab.org>
Cc: srfinv at jlab.org <srfinv at jlab.org>; pansophy <pansophy at jlab.org>; Ed Daly <edaly at jlab.org>; E. Anne McEwen <mcewen at jlab.org>; Tony Reilly <areilly at jlab.org>
Subject: RE: [Pansophy] PPU-01 Cryomodule Changes SNSPPU-CMA-CMASS-ASSY Serial Number correction


Naeem,



The CMASSSN is an incorrect serial number as the Cold Mass is Assembled at JLab and not received as a part like in L2PRD.

The traveler SNSPPU-CMA-CMASS-ASSY has been modified to have CMSN which is what is needed to connect the cavity string with the cryomodule for reports/drill-downs.

I hope this does not cause any problems for you.



Thank You.



Valerie Bookwalter

Jefferson Lab, SRF Department

Pansophy Team

1-757-813-6716 (CELL)

1-767-269-5802 (OFFICE – currently working offsite)







From: Pansophy <pansophy-bounces at mailman.jlab.org> On Behalf Of Mike Dickey
Sent: Monday, April 5, 2021 2:32 PM
To: Naeem Huque <huque at jlab.org>
Cc: srfinv at jlab.org; pansophy <pansophy at jlab.org>
Subject: Re: [Pansophy] PPU-01 Cryomodule Changes



Hi Naeem,



I thought that once the String came out of the Clean Room, it usually started tracking as the CMSN.  CMASSSN is unique to SNSPPU.



Please check the CM Locations page for accuracy.



Mike Dickey

SRF Inventory Technician

Jefferson Lab
12000 Jefferson Ave
Newport News, VA 23606
(757) 269-7755



From: Naeem Huque <huque at jlab.org<mailto:huque at jlab.org>>
Sent: Monday, April 5, 2021 2:22 PM
To: Mike Dickey <mdickey at jlab.org<mailto:mdickey at jlab.org>>
Cc: srfinv at jlab.org<mailto:srfinv at jlab.org>
Subject: PPU-01 Cryomodule Changes



Hi Mike,



Could you please make the CMASSSN open with CMASS01 for the traveler. Also, PPU-01 should move from the cleanroom to the assembly rail (closest to the cantilever fixture) on the test lab production floor board on Pansophy



Thanks,

Naeem



Naeem Huque

Staff Engineer

Superconducting Radiofrequency (SRF)

Jefferson Lab

12000 Jefferson Ave

Newport News

VA, 23606

Cell: 217-721-5422
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20210405/486d392a/attachment.html>