[Pansophy] C100R Guard Vac WG Inspection Traveler needed - C100R GVWG not in Pansophy ??

Fri Apr 16 12:56:19 EDT 2021

Liang -

C100R GVWG  is not in Pansophy ,  could you please follow up to get it into the system so its available for Jerry to use

Thanks Anne

From: Liang Zhao <lzhao at jlab.org>
Sent: Friday, April 16, 2021 12:07 PM
To: E. Anne McEwen <mcewen at jlab.org>
Cc: Scott Williams <scott at jlab.org>; George DeKerlegand <georged at jlab.org>; Earl Mosby <mosby at jlab.org>
Subject: Re: C100R Guard Vac WG Inspection Traveler needed

Anne,

I think the C100R GVWG traveler is ready to use, as Scott mentioned in one of the C100R meetings recently. Jerry can go ahead and follow the steps in the traveler with all the inspections for re-use. I'm interested to see the condition of the plating, but that shouldn't hold up Jerry's inspection.

I will stop by and check with him to see if he has any questions on Monday.

Thanks,
Liang
________________________________
From: E. Anne McEwen <mcewen at jlab.org<mailto:mcewen at jlab.org>>
Sent: Friday, April 16, 2021 11:28 AM
To: Liang Zhao <lzhao at jlab.org<mailto:lzhao at jlab.org>>
Cc: Scott Williams <scott at jlab.org<mailto:scott at jlab.org>>; George DeKerlegand <georged at jlab.org<mailto:georged at jlab.org>>; Earl Mosby <mosby at jlab.org<mailto:mosby at jlab.org>>
Subject: RE: C100R Guard Vac WG Inspection Traveler needed

Hello Laing

The parts & a copy of the P1 traveler are in the CMM room - Jerry is available to do some of the inspections , Please see him the next time you are here to address any questions he might have . I am assuming you would need to do the plating inspection . I assume the documentation cannot be started until there is a C100R traveler available

Please let us know if you need any help with the traveler

Thanks Anne

From: E. Anne McEwen
Sent: Friday, April 16, 2021 11:15 AM
To: SRF Pansophy (pansophy at jlab.org<mailto:pansophy at jlab.org>) <pansophy at jlab.org<mailto:pansophy at jlab.org>>; Liang Zhao <lzhao at jlab.org<mailto:lzhao at jlab.org>>
Cc: Scott Williams <scott at jlab.org<mailto:scott at jlab.org>>; George DeKerlegand <georged at jlab.org<mailto:georged at jlab.org>>; Earl Mosby <mosby at jlab.org<mailto:mosby at jlab.org>>; Kurt Macha <macha at jlab.org<mailto:macha at jlab.org>>; Tony Reilly <areilly at jlab.org<mailto:areilly at jlab.org>>
Subject: RE: C100R Guard Vac WG Inspection Traveler needed

Hello Liang

We need an inspection traveler for the Guard Vac WG for C100R - It looks like the closest thing is the one for P1, where you were the author

Could you please follow up on this so a traveler becomes available

The parts are now in the inspection room

Thanks Anne

From: E. Anne McEwen
Sent: Friday, April 16, 2021 11:11 AM
To: SRF Pansophy (pansophy at jlab.org<mailto:pansophy at jlab.org>) <pansophy at jlab.org<mailto:pansophy at jlab.org>>
Cc: Scott Williams <scott at jlab.org<mailto:scott at jlab.org>>; George DeKerlegand <georged at jlab.org<mailto:georged at jlab.org>>; Earl Mosby <mosby at jlab.org<mailto:mosby at jlab.org>>; Kurt Macha <macha at jlab.org<mailto:macha at jlab.org>>; Tony Reilly <areilly at jlab.org<mailto:areilly at jlab.org>>
Subject: FW: C100R Guard Vac WG Inspection Traveler needed

Hello Pansophy Team -

Could you please copy the P1 traveler "P1-INSP-GVWG"  for C100R and add it to your master list for C100R

Thanks Anne

From: Scott Williams <scott at jlab.org<mailto:scott at jlab.org>>
Sent: Friday, April 16, 2021 11:08 AM
To: E. Anne McEwen <mcewen at jlab.org<mailto:mcewen at jlab.org>>
Subject: Re: C100R Guard Vac WG Inspection Traveler needed

Hi Anne,

That's interesting (don't know the history) however  we need to copy the same one used for P1 and put in the C100R. Can you  have someone do that for us?

Thanks,

Scott

________________________________

From: E. Anne McEwen <mcewen at jlab.org<mailto:mcewen at jlab.org>>
Sent: Friday, April 16, 2021 11:02 AM
To: Scott Williams <scott at jlab.org<mailto:scott at jlab.org>>
Cc: SRF Pansophy (pansophy at jlab.org<mailto:pansophy at jlab.org>) <pansophy at jlab.org<mailto:pansophy at jlab.org>>; George DeKerlegand <georged at jlab.org<mailto:georged at jlab.org>>; Earl Mosby <mosby at jlab.org<mailto:mosby at jlab.org>>
Subject: C100R Guard Vac WG Inspection Traveler needed

Hi Scott

There is no C100R Guard  Vac WG inspection traveler , however it does nook like there is one for P1 -

Could you please arrange for a traveler for C100R also, or let us know how you want to proceed

Thanks Anne

 P1-INSP-GVWG

_______________________________________________________________________________

E. Anne McEwen

JSA / Jefferson Lab

SRF Institute

Newport News, VA 23606

Office: +1 (757) 269-5539

Email:   mcewen at jlab.org<mailto:mcewen at jlab.org>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20210416/9c22f43a/attachment-0001.html>