[Pansophy] FW: SNSPPU - 8 Pin Cryogenic Feedthru

[E. Anne McEwen]

Hello Peter ,

Please advise which traveler we are supposed to use for the inspection in place of this one

Thanks Anne

From: Peter Owen <powen at jlab.org>
Sent: Monday, April 26, 2021 1:13 PM
To: Gary Cheng <cheng at jlab.org>
Cc: E. Anne McEwen <mcewen at jlab.org>
Subject: Re: FW: SNSPPU - 8 Pin Cryogenic Feedthru

Hi Gary and Anne,

I've asked pansophy group to remove this traveler, SNSPPU-INSP-FT08P. The steps in it are covered in other inspection travelers so this isn't needed.

Thanks,
Peter
________________________________
From: Gary Cheng <cheng at jlab.org<mailto:cheng at jlab.org>>
Sent: Monday, April 26, 2021 8:51 AM
To: Peter Owen <powen at jlab.org<mailto:powen at jlab.org>>
Cc: E. Anne McEwen <mcewen at jlab.org<mailto:mcewen at jlab.org>>
Subject: Re: FW: SNSPPU - 8 Pin Cryogenic Feedthru

Peter,

Is it your traveler that Anne is talking about?

My feedthroughs are installed on end cans. They don't see cryogenic temperature.

Gary
On 4/26/2021 8:35 AM, E. Anne McEwen wrote:

Dwg in the traveler does not appear to be a link - however there is a picture of the drawing on Page 1, assume that's all I need



Anne



From: E. Anne McEwen
Sent: Monday, April 26, 2021 8:34 AM
To: srfinv at jlab.org<mailto:srfinv at jlab.org>
Cc: John Fischer <fischer at jlab.org><mailto:fischer at jlab.org>; Earl Mosby <mosby at jlab.org><mailto:mosby at jlab.org>; George DeKerlegand <georged at jlab.org><mailto:georged at jlab.org>
Subject: SNSPPU - 8 Pin Cryogenic Feedthru



Hi Mike & Calvin



Do you have the 8 Pin Cryogenic Feed thru in stock , if it is not too many boxes could you bring them to the CMM room and leave them on the shelf



Thanks Anne



PUTNPR

G. Cheng/P. Owen

Cryomodule Tuner Mechanical & Visual Inspections

8 Pin Cryogenic Feedthru Inspection

SNSPPU-INSP-FT08P





_______________________________________________________________________________

E. Anne McEwen

JSA / Jefferson Lab

SRF Institute

Newport News, VA 23606

Office: +1 (757) 269-5539

Email:   mcewen at jlab.org<mailto:mcewen at jlab.org>



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20210426/21c0a950/attachment.html>