[Pansophy] L2HE-INSP-CAV-R2

[Allen Samuels]

Tiffany,

The traveler has been edited and routed for approvals.

Allen

From: Tiffany Ganey <ganey at jlab.org>
Sent: Friday, August 6, 2021 1:22 PM
To: Allen Samuels <samuels at jlab.org>
Cc: pansophy <pansophy at jlab.org>
Subject: RE: L2HE-INSP-CAV-R2

Hi Allen,

Thanks for fixing the special characters.  It looks like I must have accidentally inserted a page break between the Goals and Step 1.  If you look at the version of L2HE-INSP-CAV-R1 currently in Pansophy, the Goals and Step 1 are both on the same screen.  Please just delete the page break so that Step 1 is on the first page.

Thank you,


[cid:image001.png at 01D78ACC.9BCFB040]
Tiffany Ganey

From: Allen Samuels <samuels at jlab.org<mailto:samuels at jlab.org>>
Sent: Friday, August 6, 2021 1:05 PM
To: Tiffany Ganey <ganey at jlab.org<mailto:ganey at jlab.org>>
Cc: pansophy <pansophy at jlab.org<mailto:pansophy at jlab.org>>
Subject: L2HE-INSP-CAV-R2

Tiffany,

I was looking over L2HE-INSP-CAV-R2 for review. It looks mostly good, save for a few special characters I had to fix, but there is one major issue that needs to be addressed. All travelers need an serial number variable on the P1, at the bare minimum. You do have these, but they are on the P2 due to the Incoming Inspection Goals section. In its current state, the traveler will not go into Pansophy.
The two easiest solutions are as follows. The first is to find some way to incorporate the SN variables into the P1 and leave the rest of the traveler as is. The second option is to combine the P1 and P2 into one page by deleting the page break and combining the two charts together.
I have attached the traveler with my small revisions for your convenience. Please decide how you would like to proceed, and either upload a revised traveler, or let us know which you would like us to do.

Thank you for your time,

Allen
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20210806/7914853d/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 475820 bytes
Desc: image001.png
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20210806/7914853d/attachment-0001.png>