[Pansophy] SNS PPU Cold Mass 01 D3's SN and SNType

[Gary Cheng]

All,

The recently released D3 33 and 36 for PPU cold mass 01 have the same 
SN: PPU-01 and SNType: ID. These don't appear correct to me.

SRF spec/procedure PR-P-007 (attached) defines the format of S/Ns. So, 
to me, the SN for cold mass 01 should be 104211500-A002-A-001.
As to the SNType, CMASSN should be used.

The two specific D3 #33 & #36 address two issues associated with two 
types of parts, the G-10 isolators and FPC bellows, respectively. If a 
D3 is intended to address an issue with one certain part, e.g. only one 
of the four FPC bellows, then I think the D3 should use the SN for that 
specific bellows and SNType should be what we created for the FPC bellows.

Comments are welcome.

Gary
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20210811/570731c2/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: SRF Serialization PR-P-007 Rev A Signed.pdf
Type: application/pdf
Size: 705818 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20210811/570731c2/attachment-0001.pdf>