[Pansophy] SNSPPU VTRF traveler R3

[Megan McDonald]

It appears that my changes aren't pushing through to Pansophy. I will let you know when this is fixed

Megan

From: Pansophy <pansophy-bounces at mailman.jlab.org> On Behalf Of Megan McDonald
Sent: Monday, January 11, 2021 9:20 AM
To: Peter Owen <powen at jlab.org>; pansophy <pansophy at jlab.org>
Cc: Pashupati Dhakal <dhakal at jlab.org>
Subject: Re: [Pansophy] SNSPPU VTRF traveler R3

I have made them as small as I can, however, these were marked as a <<COMMENT>> in the Traveler document so that it is what it went in as. The box is smaller but it can still accept large amounts of text. For the next revision (if there is one), consider using <<TEXT>>, or since it is a serial number, <<SN>>.

Hope this helps!

Megan


From: Pansophy <pansophy-bounces at mailman.jlab.org<mailto:pansophy-bounces at mailman.jlab.org>> On Behalf Of Peter Owen
Sent: Saturday, January 9, 2021 3:22 PM
To: pansophy <pansophy at jlab.org<mailto:pansophy at jlab.org>>
Cc: Pashupati Dhakal <dhakal at jlab.org<mailto:dhakal at jlab.org>>
Subject: [Pansophy] SNSPPU VTRF traveler R3

Hello,
In the new revision of the SNSPPU-VTRF traveler, we added fields to record the serial number of the power meter used during calibration. Could these three text boxes in step 8 be resized to a single line? If this requires a new revision, don't worry about it.

Thanks,

Peter
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20210111/d962d30a/attachment-0001.html>