[Pansophy] SNSPPU-INSP-HOBCB Inspection

[Gary Cheng]

Yes, just visual inspection for your group. Weld inspection has been done.
Gary

On 3/4/2021 8:58 AM, E. Anne McEwen wrote:
>
> I think that Jerry is looking at this right now –  from what we could 
> see it was only visual
>
> Anne
>
> *From:*Gary Cheng <cheng at jlab.org>
> *Sent:* Thursday, March 4, 2021 8:56 AM
> *To:* E. Anne McEwen <mcewen at jlab.org>
> *Cc:* Ed Daly <edaly at jlab.org>; SRF Inventory (srfinv at jlab.org) 
> <srfinv at jlab.org>; SRF Pansophy (pansophy at jlab.org) 
> <pansophy at jlab.org>; Naeem Huque <huque at jlab.org>; Kirk Davis 
> <kdavis at jlab.org>
> *Subject:* Re: SNSPPU-INSP-HOBCB Inspection
>
> Hi Anne,
>
> It looks like the HOBCB bellows kits are not inspected yet. Could you 
> please add this to your queue?
>
> Thanks,
> Gary
>
> On 11/16/2020 2:51 PM, E. Anne McEwen wrote:
>
>     Hi Gary
>
>     I think I figured it out – my mistake – somehow missed printing of
>     the A026. Print in the traveler when I went to see Calvin
>
>     Thanks for your help – Anne
>
>     *From:*Gary Cheng <cheng at jlab.org> <mailto:cheng at jlab.org>
>     *Sent:* Monday, November 16, 2020 2:23 PM
>     *To:* E. Anne McEwen <mcewen at jlab.org> <mailto:mcewen at jlab.org>
>     *Cc:* Ed Daly <edaly at jlab.org> <mailto:edaly at jlab.org>; SRF
>     Inventory (srfinv at jlab.org <mailto:srfinv at jlab.org>)
>     <srfinv at jlab.org> <mailto:srfinv at jlab.org>; SRF Pansophy
>     (pansophy at jlab.org <mailto:pansophy at jlab.org>) <pansophy at jlab.org>
>     <mailto:pansophy at jlab.org>; Katherine Wilson <kwilson at jlab.org>
>     <mailto:kwilson at jlab.org>; Naeem Huque <huque at jlab.org>
>     <mailto:huque at jlab.org>
>     *Subject:* Re: SNSPPU-INSP-HOBCB Inspection
>
>     Hi Anne,
>
>     I had to step away for a while and thanks for Naeem's help!
>     If something is still unclear about the HOBCB kits, please let me
>     know.
>
>     Thanks,
>     Gary
>
>     On 11/16/2020 1:13 PM, Naeem Huque wrote:
>
>         There are 3 bellows to a kit and the photos seem to match
>         exactly the kit list above (taken from the traveler). Three
>         stickers are for the separate bellows, and one sticker is the
>         kit. I don't understand the issue...
>
>         Thanks,
>
>         Naeem
>
>         ------------------------------------------------------------------------
>
>         *From:*Katherine Wilson <kwilson at jlab.org>
>         <mailto:kwilson at jlab.org>
>         *Sent:* Monday, November 16, 2020 11:54 AM
>         *To:* E. Anne McEwen <mcewen at jlab.org> <mailto:mcewen at jlab.org>
>         *Cc:* Naeem Huque <huque at jlab.org> <mailto:huque at jlab.org>;
>         Gary Cheng <cheng at jlab.org> <mailto:cheng at jlab.org>; Ed Daly
>         <edaly at jlab.org> <mailto:edaly at jlab.org>; SRF Inventory
>         (srfinv at jlab.org <mailto:srfinv at jlab.org>) <srfinv at jlab.org>
>         <mailto:srfinv at jlab.org>; SRF Pansophy (pansophy at jlab.org
>         <mailto:pansophy at jlab.org>) <pansophy at jlab.org>
>         <mailto:pansophy at jlab.org>
>         *Subject:* Re: SNSPPU-INSP-HOBCB Inspection
>
>         A026 is the con bellows.
>
>         > On Nov 16, 2020, at 11:42, E. Anne McEwen <mcewen at jlab.org>
>         <mailto:mcewen at jlab.org> wrote:
>         >
>         > Hello Naeem & Gary
>         >
>         > I went up  to inventory again  and had Calvin open one of
>         the boxes - 2 of the bellows had part numbers that match the
>         traveler you speak of (attached)  , however there is a 3rd
>         bellows with Part No  ending A26, that is not in your traveler
>         >
>         > So I asked Calvin to put the parts back in the box until it
>         can all be sorted out - there is a lot of other work we need
>         to get done for C75 & P1 before Thanksgiving
>         >
>         > FYI-  Where we have the travelers & dwgs and the part is not
>         too big , I have been bringing down the first article - so
>         that it is available should there be an opportunity  - but
>         this one I don't think is clear yet
>         >
>         > Anne
>         >
>         >
>         > -----Original Message-----
>         > From: copier at jlab.org <mailto:copier at jlab.org>
>         <copier at jlab.org> <mailto:copier at jlab.org>
>         > Sent: Monday, November 16, 2020 11:30 AM
>         > To: E. Anne McEwen <mcewen at jlab.org> <mailto:mcewen at jlab.org>
>         > Subject: Xerox Scan
>         >
>         > Please open the scanned attachment
>         >
>         > Number of Images: 5
>         > Attachment File Type: PDF
>         >
>         > Device Name: cs31
>         > Device Location: 58    Test Lab    2nd Fl Rm 2206
>         >
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20210304/0e88d92c/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 5236 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20210304/0e88d92c/attachment-0002.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.png
Type: image/png
Size: 86396 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20210304/0e88d92c/attachment-0003.png>