[Pansophy] C100R spare Kyocera feedthru serial numbers (Traveler Name - please reconsider having 2 travelers)

[HyeKyoung Park]

Hi Valerie,
Combining two is OK with me especially Pansophy prefers it! One question is;

The old C100R traveler (R2) was written before you split the steps between work stations. So the leak check is a part of R2. For the new SPARE traveler I was going to have 2 other travelers for cold cycle (re-use doesn't need cold cycle bit kyocera will need it) and leak check. Any prefrerence how to organize? I suggest a short Teams meeting tomorrow morning so I'll explain. I think 30 min will be more than enough.
HyeKyoung

________________________________
From: Valerie Bookwalter <bookwalt at jlab.org>
Sent: Wednesday, March 24, 2021 9:33 AM
To: HyeKyoung Park <hkpark at jlab.org>
Cc: Liang Zhao <lzhao at jlab.org>; pansophy <pansophy at jlab.org>; Tony Reilly <areilly at jlab.org>; E. Anne McEwen <mcewen at jlab.org>
Subject: RE: C100R spare Kyocera feedthru serial numbers (Traveler Name - please reconsider having 2 travelers)


HyeKyoung,



The use of SPARE does not follow our new traveler naming convention.

The traveler ID  C100R-CAV-INSP-HMFT-SPARE-R1.



Additionally, the use of a second traveler for HMFT inspections is not advisable.

·       C100R-CAV-INSP-HMFT

·       C100R-CAV-INSP-HMFT-SPARE



Would you please consider combining your 2 travelers into a single traveler

with one page for Re-Use HMFTs

and one page for KYOCERA HMFTs?

This is being used successfully in a similar traveler C75-CPR-INSP-HOML, where both new and old parts are being inspected within the same traveler.

Additionally, it gives the inspection team a single place for all inspections of the HMFTs.

This will also aid in future datamining.

I have attached a sample traveler for your consideration.

I have also updated the traveler to the current Template and renamed to the new Traveler Naming Convention:

·       C100R-INSP-HMFT-R3

Please review and let us know if this would be acceptable to use.

Thank You for your consideration.





Valerie Bookwalter

Jefferson Lab, SRF Department

Pansophy Team

1-757-813-6716 (CELL)

1-767-269-5802 (OFFICE – currently working offsite)







From: Pansophy <pansophy-bounces at mailman.jlab.org> On Behalf Of HyeKyoung Park
Sent: Friday, March 19, 2021 10:10 AM
To: Megan McDonald <megan at jlab.org>; Mike Dickey <mdickey at jlab.org>
Cc: Liang Zhao <lzhao at jlab.org>; pansophy <pansophy at jlab.org>
Subject: Re: [Pansophy] C100R spare Kyocera feedthru serial numbers



Hi Megan,

The current C100R traveler is still valid. That's for the feedthru that we'll reuse. This is a different traveler for new parts.

HyeKyoung



________________________________

From: Megan McDonald <megan at jlab.org<mailto:megan at jlab.org>>
Sent: Friday, March 19, 2021 7:30 AM
To: HyeKyoung Park <hkpark at jlab.org<mailto:hkpark at jlab.org>>; Mike Dickey <mdickey at jlab.org<mailto:mdickey at jlab.org>>
Cc: Liang Zhao <lzhao at jlab.org<mailto:lzhao at jlab.org>>; pansophy <pansophy at jlab.org<mailto:pansophy at jlab.org>>
Subject: RE: C100R spare Kyocera feedthru serial numbers



HyeKyoung,



Are you opposed to calling it C100R-CAV-INSP-HMFT-R3 vs SPARE?



Mean



From: Pansophy <pansophy-bounces at mailman.jlab.org<mailto:pansophy-bounces at mailman.jlab.org>> On Behalf Of HyeKyoung Park
Sent: Wednesday, March 17, 2021 10:15 AM
To: Mike Dickey <mdickey at jlab.org<mailto:mdickey at jlab.org>>
Cc: Liang Zhao <lzhao at jlab.org<mailto:lzhao at jlab.org>>; pansophy <pansophy at jlab.org<mailto:pansophy at jlab.org>>
Subject: [Pansophy] C100R spare Kyocera feedthru serial numbers



Hi Mike,

I uploaded a new traveler for Kyocera HOM feedthru. Would you please enable that traveler have the s/n drop down list?

The traveler ID is C100R-CAV-INSP-HMFT-SPARE-R1.

Thanks!

HyeKyoung
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20210324/4785965c/attachment-0001.html>