[Pansophy] How to make a batch traveler

[Larry King]

Hello Pansophy team,
I would really appreciate some advice on how best to create a batch traveler.  The acceptance test is done in more of an assembly line model, so one data point is taken on a batch of, typically, 30 parts at a time.  Then all the parts are moved to the next test setup, and 30 of the next data points are taken.  This is much more easily captured in tabular form.  To avoid transcription errors, it is desirable to upload that form directly, into one traveler for the batch of parts.

My rough draft is basically

1-      Enter the serial numbers of all the parts in the batch.

2-      Perform the inspection using the referenced procedure.

3-      Record all of the test data in the referenced Excel template.

4-      Upload completed Excel spreadsheet.


I'm not sure if step 1 should contain 30 SN variables?  Or should step 1 be a text field, to type in all of the serial numbers in the batch?
I can't find any examples of a similar traveler, so I'd be grateful for any advice on how best to lay out the steps.
Thanks,
Larry
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20210326/a242bfe7/attachment.html>